Need help?Do you have a question about the Xtralis ADPRO 49840600 and is the answer not in the manual?
General| Series | ADPRO |
|---|---|
| Product Type | Recording Equipment |
| Model | 49840600 |
| Category | Recording Equipment |
| Manufacturer | Xtralis |
Details the module's inputs, outputs, and special features like PTZ and audio support.
Outlines combinations of internal and external MIO/EIO cards for XO devices.
Specifies the necessary XO device firmware and USB port requirements for installation.
Lists reference numbers for ordering single and double XO I/O Interface USB modules.
Details power supply, operating temperature, humidity, and housing dimensions for the modules.
Instructions for attaching self-adhesive rubber feet to the bottom of the module for stability.
Guides users on enabling Technician access and generating a PIN for the hardware configuration tool.
Explains how to map USB modules to MIO/EIO card sets using the hardware configuration tool.
Provides steps to reset USB port configuration to default settings after removing modules.
Illustrates the layout of inputs and outputs on a double module, with left side for single module.
Describes NEOL, SEOL, and DEOL input circuit configurations and their corresponding resistance values.
Details the procedure for connecting wires to Dinkle or Phoenix spring insertion connectors using a screwdriver.
Guides users on setting up modules via hardware tool and configuring inputs/outputs in XO client.
To Next Page
