Wrapping up:
PRO E Detector Advantages
• Up to 4 m (13 ft) mounting height to minimise the risk of vandalism
• Precision mirror optics for gap-free, uniform coverage with creep zones (curtain-models
only) No finger-and-gap coverage patterns with detection zone starting as little as 1 m (3.3 ft) from
the mounting location, at recommended mounting height of 4 m (13 ft)
• Ultra-low nuisance alarm rate thanks to advanced digital signal processing (DSP), and adaptive
threshold discrimination
• Directional discrimination for additional 60% nuisance alarm reduction (D-models only), allowing
for right-to-left or left-to-right intrusion alarms only
• Low cost per unit of coverage cutting edge Swiss designed engineering results in a highly
reliable, cost efficient product
• Low power consumption -ideal for wireless and solar applications 18 mA at 12 V DC / 10 mA at
24 VAC (without heater in H-models)
• Auto-sensing supply voltage 10.5 to 30 VDC and 24 VAC
• Heater and heavy-duty silicon wafer front window for -40 to +60ºC (-40 to 140ºF) operating
temperature, ideal for extreme environments (H-models only)
• Detection of intruders crawling, walking or running at speeds from 0.2 to 5 m/s (0.7 to 16 ft/s)
• Remote configuration and alarm management via RS485 data port for two-way serial
communication
• Passive single-ended system – not detectable; no separate transmitter / receiver to attack
• Optional Wireless alarm transmission
• Fast and reliable antimasking-Sensor
• 360PROtect™ creepzone sensor
• POE power over Ethernet module available
To Next Page