Why is my XtraVac Kitchen Appliances vacuum insufficient?
There are several reasons why your XtraVac Kitchen Appliances vacuum might not be providing sufficient vacuum. It could be due to insufficient vacuum oil, in which case you should fill it. Alternatively, the oil quality might have deteriorated, requiring a replacement. Finally, a damaged rubber gasket could also be the cause, and you would need to replace it.
What to do if there is poor sealing on the bag mouth of my XtraVac Kitchen Appliances?
If you're experiencing poor sealing on the bag mouth with your XtraVac Kitchen Appliances, the heating wire might be burned. The suggested solution is to replace it.
How to fix incomplete sealing line in XtraVac Kitchen Appliances?
An incomplete sealing line in your XtraVac Kitchen Appliances may be due to a damaged heat-resistance cloth. If this is the case, replace it.
General| Category | Kitchen Appliances |
|---|---|
| Model | CM640 |
| Type | Vacuum Sealer |
| Frequency | 60Hz |
| Bag Width | 30cm |
Read, understand, and follow all instructions in the manual and on the machine before starting.
Guidelines for safely transporting, installing, and packing the machine.
Safety checks and procedures before and after operating the machine.
Detailed overview of the machine's design, materials, and capabilities.
Explanation of what the machine does and its primary purposes.
Lists suitable products for packaging with the machine.
Identifies and describes labels, warnings, and nameplates on the machine.
Technical specifications including dimensions, weight, and power requirements.
Explanation of the purpose and function of each control panel button.
Step-by-step guide for operating the machine.
Procedures for cleaning, oil replacement, and general upkeep of the machine.
Common issues, their causes, and suggested solutions.
Lists standard and optional accessories available for the machine.
Specifies the noise emission level of the machine during operation.
Recommended temperature and humidity for storing the machine.
Guidelines for the ideal environmental conditions for machine operation.
Diagram showing the layout of the main control box components.
Diagram illustrating the position and connection of control elements.
Electrical schematic showing power distribution for the machine.
Detailed wiring diagrams for the machine's control circuits.
List of electrical components used in the machine with their specifications.
Diagram and explanation of the machine's vacuum system.
Diagram and explanation of the gas supply system.
List of pneumatic components with their specifications.
To Next Page
