Xtreme Power 75159 - Maintenance and Troubleshooting; Routine Maintenance Checks; Troubleshooting Common Issues

MAINTENANCE AND TROUBLESHOOTING
9
Conrm the screws in the baseboard are installed tightly. If any are found, re-tighten them before use.
Conrm the power cords are in good condition. If any parts are worn, cracked or in bad condition,
replace them prior to starting the pump.
The pump should be stopped immediately if the temperature is too high. Inspect and if need be, have
a technician repair it.
If loud noises are coming from the pump, turn the power off immediately and have a service technician
service and repair it.
TROUBLESHOOTING