To Next PageTo Next Page
Need help?Do you have a question about the Xtreme Power 90154 and is the answer not in the manual?
General| Brand | Xtreme Power |
|---|---|
| Model | 90154 |
| Category | Swimming Pool Filter |
| Language | English |
Essential safety warnings and precautions for operating the salt water system chlorinator.
Guidance on maintaining proper water chemistry for optimal chlorinator performance.
Recommendations for cyanuric acid levels and warnings for indoor pool use.
Details on TDS, metals, nitrates, and phosphates affecting pool water.
Specifies target ranges for pH, hardness, alkalinity, salt, and chlorine.
Instructions on testing chlorine and the type of salt to use.
Considerations for installing the chlorinator on plaster and vinyl liner pools.
Guidance on determining the correct salt level for the pool.
Explanation of the saturation index formula and its importance.
Step-by-step instructions for adding or removing salt from the pool.
A table to determine the amount of salt needed based on current levels.
Overview of the chlorinator's cell unit, power center, and sensors.
Critical warning about potential chlorine gas buildup due to improper wiring.
Guidance on installing feeders and plumbing diagrams for the CFPT.
Detailed steps for mounting and connecting the CFPT cell.
Instructions for securely connecting the cell's power cable.
Formulas for calculating pool volume in gallons and liters.
Explanation of control panel LEDs and their meanings.
How to use control buttons for settings like Super Chlorinate and output.
Emphasis on using an external timer for proper CFPT operation.
How to adjust sanitizer output percentage for desired chlorine levels.
Recommended start-up steps including super chlorination and general cautions.
Step-by-step guide for installing the CFPT cell into the plumbing system.
Procedure for connecting the cell cable to the power center unit.
Detailed instructions for removing and replacing the CFPT cell.
Instructions for restarting the system after cell replacement.
Procedure for removing air from the system and checking salt levels.
Diagram and list of all parts included with the CFPT chlorinator.
Causes and solutions for low or no chlorine in the pool.
Interpreting red salt indicator lights (on or flashing).
Troubleshooting no power, water leaks, and flow problems.
Addressing mineral buildup and cold water warnings.
How to access and interpret diagnostic data from the control panel.
Understanding the meaning of Power and Generating LED indicators.
Manufacturer's statement regarding repairs and qualifications.
Space to record the product's serial number or purchase date.
Contact information for questions, problems, or missing parts.
