OPERATION
6
FUNCTIONAL BUTTON:
MODE
- Push down to select functions.
- Push down and hold for 2 seconds to reset all functional value.
FUNCTIONS AND OPERATIONS
1. SCAN: When in SCAN position, the meter will rotate through the following functions:
time, count, total count, calorie, count/min. Each display will be hold for 6 seconds.
2. TIME: Count the rowing time from exercise start to end.
3. COUNT: Count the rowing strokes from start to end.
4. TOTAL COUNT: Count the total rowing strokes from start to end.
5. CALORIES: Count the total calories from rowing start to end.
6. COUNT/MIN: Display current rowing strokes per minute, or the frequency per minute.
7. AUTO ON/OFF & AUTO START/STOP:
Without any signal for 4 minutes, the power will turn off automatically. When the stroke
is in motion or pressing the button, the monitor is in action.
SPECIFICATIONS
To Next Page