Need help?Do you have a question about the Xtreme MOX230-12HFN8-QRD6GW and is the answer not in the manual?
General safety guidelines and warnings for handling and servicing the unit.
Specific safety measures and procedures for servicing units with flammable refrigerants.
Details on indoor and outdoor unit model numbers and their specifications.
Information on recommended pipe lengths and elevation differences for optimal performance.
Diagrams illustrating the electrical connections for indoor and outdoor units.
List of abbreviations used for indoor unit components and their meanings.
List of abbreviations used for outdoor unit components and their meanings.
Explanation of various display indicators and their functions on the unit.
Details on built-in safety mechanisms and protection features of the air conditioner.
Overview of fundamental operational modes and functions like cooling, heating, and fan.
Procedures for initial inspection and leak testing after installation.
Step-by-step guide for recharging the system with refrigerant.
Instructions for collecting refrigerant and preparing the system for re-installation.
Technical drawings showing the dimensions of the indoor unit.
Detailed procedures for disassembling the front panel and internal components of the indoor unit.
A table listing outdoor unit models, panel plates, and PCB boards.
Technical drawings showing the dimensions of various outdoor unit panel plates.
Instructions for disassembling the panel plates of different outdoor unit models.
Procedures for disassembling and handling electrical components and PCBs.
Steps for removing and disassembling the fan assembly from the outdoor unit.
Detailed instructions for removing and replacing the outdoor unit fan motor.
Procedure for removing the sound insulation blanket from the outdoor unit.
Instructions for disassembling the four-way valve, especially for heat pump models.
Steps and precautions for safely removing and disassembling the compressor.
Essential safety warnings and precautions before performing troubleshooting.
A table listing common error codes, their display, and potential solutions.
A form for documenting customer complaints, installation details, and failure descriptions.
Procedure for accessing and displaying operational information and error codes via the remote.
Guides for diagnosing and resolving issues when no specific error code is displayed.
A table suggesting parts replacement based on specific error codes for quick maintenance.
Detailed diagnosis and solutions for specific error codes encountered by the unit.
Table showing resistance values of temperature sensors T1, T2, T3, and T4 at various temperatures.
Table showing resistance values for TP temperature sensors at different temperatures.
Charts detailing system pressures (BAR, PSI, MPa) for cooling and heating modes.
To Next Page
General