XtremepowerUS 61109-XP User Manual (English)

To Next Page

3600W DEMOLITION JACK HAMMER

ITEM # 61109-XP

SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,

OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S

SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH

AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).

OWNER’S MANUAL AND SAFETY INSTRUCTIONS

FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST

Need help?

Do you have a question about the XtremepowerUS 61109-XP and is the answer not in the manual?

XtremepowerUS 61109-XP Specifications

General

Motor Power	2200W
Voltage	110V/60Hz
Power Source	Corded Electric
Tool Holder	1-1/8" Hex
Power	2200 Watts
Blows Per Minute	1900 BPM

Summary

Important Safety Information

General Safety Warnings

Read all safety warnings and instructions to avoid electric shock, fire, or serious injury.

Product Information

Features

Details product specifications including power, weight, impact rates, and included accessories.

Operation

Work Area Set Up

Guidance on preparing a safe and clean work area, securing materials, and managing cords.

Prior to Operation

Checks for power source, grounding, switch position, and extension cord suitability.

Install / Remove Accessories

Instructions for attaching and detaching chisels and the auxiliary handle.

Operation / Maintenance

Demolish / Plane Operation

Proper technique for holding and operating the tool during demolition and planing tasks.

Tool Lubrication

Procedure for lubricating the tool after 60 hours of use or when brake effectiveness decreases.

Maintenance

Instructions for checking and replacing worn brushes, emphasizing professional servicing for repairs.

XtremepowerUS 61109-XP User Manual

Table of Contents