To Next Page

To Previous Page

For Android smart phone:

Go to Settings > About Device, and

then tap Build number 7 times to enable

Developer options. Turn on USB debugging. A message

Allow USB debugging?

will pop up.

Turn on the Always allow from this computer option, and then

tap OK.

b. Connect your Android smart phone to this unit via a USB cable.

※ Please note this function is only applicable for the smart phones

equipped with wireless mirroring function, and it only supports

Android versions above 4.0. Audio streaming requires a Bluetooth

connection.

For iPhone:

a. Go to Settings > Personal Hotspot, and then turn Personal Hotspot on.

Tap iPhone WiFi, and then select your iPhone name from the hotspot list.

Enter the password when prompted.

Tap AirPlay in the Control Center on your iPhone. Select EC-Mirror and turn

Mirroring on.

※ On iPhone 4/4s, only photos can be streamed wireless to this unit. On

iPhone 5 and other later iPhone models, both music and photos can be

streamed wireless to this unit. Video streaming requires the

appropriate Apple cable or adapter.

1. Connect via a USB cable

Go to Settings > Wireless & networks > More > Tethering & portable hotspot,

and then turn Portable Wi-Fi hotspot on or tap Set up Wi-Fi hotspot.

Tap Android WiFi and then select your Android device name from the

hotspot list. Enter the password when prompted.

2. Connect via Wi-Fi

Xtrons PX5 User Manual

Questions and Answers: