1.11 Steer Key
This allows you to use the
steering wheel control of your
vehicle to control the unit.
1.12 GPS Info
This displays GPS receiver
information. You can set the
time zone.
1.16 TCH Cali (Touch Calibration)
Tap the center of “+” on the screen, and move along with the center of
“+” so as to calibrate the screen. Tap OK to save the data and exit.
1.17 Radio Settings
You can set the FM Sensitivity, AM Sensitivity, Sensitivity and Radio Area.
1.18 Instructions
1.19 RDS ON
1.14 Version
1.15 Backlight Set
Drag the slider to adjust the Day Backlight and the Night Backlight.
1.7 Auto Brightness
Big Light: Connect the illumination
wire to the positive pole of your
vehicle headlights. This makes the
dimmer function work. The unit will
dim the display automatically when theheadlights are on.
1.8 Black Time (Screen Timeout Settings)
Choose from 3 minutes, 5 minutes, 10 minutes, and cancel.
1.9 Key Light Color
You can select the blue color or the white color.
Please note:
Colorful LED button settings. Go to Factory settings > Key Light Two Color, and turn it
off. Then go to General settings > Key Light Color. Now you can choose from blue,
red, green, yellow, baby blue, pink, and white, and set it as the LED button color.
Make sure that the illumination wire is connected to the positive pole of your vehicle
headlights. The LED button will light up automatically when the headlights are on.
1.10 Language
Choose from English, French, German, Spanish, etc.
1.13 Factory Set
Enter the password 3368 to go to
Factory Settings.
Please note that making changes to items in Factory Settings may cause some
features to become unavailable.
2.1 Speakers balance settings
2. Sound settings
1.6 OSD Time ON
If you turn this on, you will see the
time on the upper right side while
watching DVD.
To Next Page
Loading...
Need help?
General