XTZ 99.26 P User Manual

Page: 11
Service & support
"Do-It-Yourself"-
service
We apply "do-it-yourself" service on all XTZ
products.
If you by yourself are able to find out what part of
the loudspeaker is defective, you are fully allowed
to unmount that part (which would normally be a
driver, a filter or the amplifier) and send it back to
us for exchange.
However, if you are not certain about how to do it,
please contact us before taking the loudspeaker
apart. We can also help you finding the fault.
You can of course always choose to return the
whole loudspeaker; therefore you should sa
ve the
original package.
To aid service, XTZ products are
constructed
and produced using common
technology, so that
basically most people
are able to "unscrew" the
loudspeaker
using common tools.
If something is
broken
If you cause additional defect
s by yourself when
unmounting the defective part, the warranty still
applies if it is obvious that the part had a
manufacturing defect. In other cases however, the
warranty does not apply if you cause other defects
on the loudspeaker.
Where to send
the product for a
warranty repair
For service we refer to your retailer.
For questions regarding service, contact us by email
support@xtz.se
Web page: www.xtz.se
ALWAYS pack the product / part very
carefully.
Unfortunately damages during
transportation
are very common. If the
package is weak, the
transporting
company does not compensate damages.
Always enclose a copy of the receipt and a
description of the defect.
Support
Please contact our free of charge support if you
need installation advi
ce, or if any problem occurs
during the installation.
Contact us by e-
mail support@xtz.se and include
your phone
number if you wish verbal help, and we
will call you back.

XTZ 99.26 P Specifications

General

Brand	XTZ
Model	99.26 P
Category	Speakers
Language	English