Need help?Do you have a question about the XU1 XAG-500 and is the answer not in the manual?
General safety advice before use, including warnings and cautions.
Procedure for fitting the safety guard to the angle grinder.
Steps for fitting and removing the grinding disc safely.
Instructions for fitting the side handle for better control.
How to control the tool's power using the switch.
Best practices for using the angle grinder safely.
Specific methods and safety measures for grinding operations.
Proper care and upkeep procedures for the angle grinder.
Servicing parts like brushes, grease, and cord.
Procedures and conditions for warranty claims.
Essential gear for safe operation.
Guidelines for tool usage, electrical safety, and extensions.
Broad safety advice for tool operation.
Explains symbols and eco-friendly disposal.
Covers proper use, servicing, and cleaning.
Covers accessory use, PPE, and operation.
Explains kickback and how to avoid it.
Specific hazards for cutting tasks.
Instructions for attaching the side handle for better control.
How to activate and adjust speed.
Control drill direction and hammer/drill mode.
Steps for bit installation and removal.
Specific advice for metal drilling.
Techniques for drilling wood.
Techniques for drilling masonry.
Basic cleaning and storage advice.
How to claim and warranty exclusions.
Essential gear for safe operation.
Guidelines for tool usage, electrical safety, and extensions.
Broad safety advice for tool operation.
Explains symbols and eco-friendly disposal.
Covers proper use, servicing, and cleaning.
Covers RCD, handle, noise, dust hazards.
Information on hazardous dusts.
Intended use and initial familiarization.
Safety notice before assembly.
Choosing the right grit.
Steps to attach sandpaper.
Connecting dust bags or vacuums.
Description of trigger and lock-on functions.
Step-by-step guide for sanding.
How to clean the tool and its vents.
Carbon brushes and cord replacement.
How to claim and warranty exclusions.
Essential gear for safe operation.
Guidelines for tool usage, electrical safety, and extensions.
Broad safety advice for tool operation.
Explains symbols and eco-friendly disposal.
Covers tool function, accessory use, PPE, operation.
Explains kickback and how to avoid it.
Covers paper size, dust, and chemical hazards.
To Next Page
General