Need help?Do you have a question about the XU1 XGT-250 and is the answer not in the manual?
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire and/or serious injury.
Keep work area clean and well lit. Do not operate in explosive atmospheres. Keep children and bystanders away.
Match plugs to outlets. Avoid body contact with earthed surfaces. Do not expose to rain or wet conditions.
Stay alert, watch what you are doing. Use personal protective equipment like eye protection.
Check supply and extension cords for damage. Keep extension cord away from cutting blades. Supervise children.
Use only in daylight. Never operate with damaged guards. Switch on only when hands are away from cutting head.
Inspect and maintain regularly. Disconnect from mains before maintenance. Store out of reach of children.
Fit the upper handle assembly onto the lower housing and insert as far as possible.
Turn trimmer upside down. Place guard over cutting head and secure with screws. Never use without guard.
Make a loop with cord, push through hole, place onto retainer. Connect socket to trimmer cord.
Depress lock-off button whilst squeezing On/Off switch to turn ON. Release trigger to turn OFF.
Wear eye protection and stout shoes. Start cutting nearest power source. Wait for full speed before cutting.
Position hole over knob, pull blade outwards to lock. Push blade towards centre to remove.
Keep air intake clean. Blow air through housing. Never immerse in liquid. Store in dry, frost-free location.
Product guaranteed for 12 months for DIY use. Warranty excludes consumable parts like cutting blades.
Warranty void if used professionally, on wrong voltage, abused, not maintained, or disassembled.
To Next Page
General