Do you have a question about the XVAPE X-MAX II Pro and is the answer not in the manual?
Details procedures for handling warranty claims and product reshipment.
The X-MAX II Pro is a portable baked vaporizer designed for use with moderate ground herbs, wax, or oils. It features an advanced heating chamber technology and is intended for adult use (18+). This device is not a medical device and should not be used to diagnose, cure, treat, or prevent any diseases. Users with health problems should consult a doctor before use. It is also not recommended for children, pregnant or breastfeeding women, individuals with life-threatening illnesses, or before driving or operating machinery. The X-MAX II Vaporizer Pen is not intended for administering medicinal or illegal substances.
The X-MAX II Pro functions as a portable vaporizer, heating materials to produce vapor for inhalation. It utilizes a ceramic heating chamber with an embedded heating element to bake the material. The device offers multiple temperature settings, allowing users to customize their vaping experience. It is powered by a Lithium Ion Battery and includes a safety power duration feature, automatically shutting off after a set period (3 minutes for X-MAX V2, 5 minutes for X-MAX V2 Pro). The device indicates battery level and heating status through LED lights.
To begin using the X-MAX II Pro, first remove the rubber mouthpiece to expose the heating chamber.
For Dry Herbs: Fill the chamber with a moderate amount of ground herb. It is important not to compress the plant material too tightly, as this can impede airflow. Once filled, replace the mouthpiece.
For Wax or Oils: Place a small amount of wax or oil into the liquid & waxy cup, ensuring the filling chamber is partially filled.
Powering On and Temperature Selection: To turn the device on, click the button three times consecutively. The Red, Green, and White lights will flash, followed by the display of the battery level.
After the battery level indicator light goes out, hold the button for 2 seconds to select your desired temperature. Holding the button for more than 4 seconds will cycle through temperatures at a faster rate. The available temperature settings are:
Once a temperature is selected, the device will automatically begin to heat up. During the heating process, the LED light will flash. It will become stable once the selected temperature is reached and will remain stable until the device automatically shuts off. Inhale slowly and deeply from the mouthpiece while the light is on. If the red light flashes 10 times, it indicates low power, and the device will automatically shut off.
Charging: To protect and extend battery life, it is recommended to charge the X-MAX II via the Wall Adapter for at least 6 hours before the first use. It can also be charged via a USB port, though this may take longer. An external 18650 battery charger is available but not included.
During charging, the LED lights will cycle through red, green, and white to indicate the battery level. When the X-MAX II is fully charged, the white LED light will flash 10 times before turning off. It is crucial to use the original charger provided by the manufacturer. The device cannot be used while charging, as this could be dangerous. If any problems or concerns arise, immediately switch off the vaporizer and unplug the power adapter. Do not attempt to fix defects yourself; contact customer service. After use, allow the vaporizer and power adapter to cool down before storing them in a dry place, away from children or unqualified persons.
Regular cleaning is essential to ensure optimal performance and prevent clogging, which can lead to a difficult draw or low vapor production.
Cleaning the Rubber Mouthpiece:
Cleaning the Filter:
Cleaning the Ceramic Heating Chamber: Use the brush tool to gently clean the walls of the heating chamber.
Important Cleaning Precautions:
Following these cleaning guidelines will help maintain the device's quality and performance over time.
| Brand | XVAPE |
|---|---|
| Model | X-MAX II Pro |
| Category | Vaporizers |
| Device Category | Portable Vaporizer |
| Compatibility | Dry Herb |
| Heating Method | Conduction |
| Charging Time | 2-3 Hours |
| Chamber Capacity | 0.3g |
| Chamber Material | Ceramic |
| Warranty | 1 year |
| Temperature Range | 100°C - 220°C |
| Battery | 18650 |
| Material | Aluminum |
Loading...