Need help?Do you have a question about the Xvive Audio U2 and is the answer not in the manual?
General| Frequency Response | 20Hz - 20kHz |
|---|---|
| Latency | < 6ms |
| Dynamic Range | > 100dB |
| Operating Band | 2.4GHz |
| Battery Life | up to 5 hours |
| Charging Time | 2 hours |
| Color | Black |
| Type | Wireless Audio System |
| Sample Rate | 48kHz |
| Battery | Rechargeable Lithium-ion |
| Connectors | 1/4" plug |
| Compatibility | Guitar, Bass, and other instruments with 1/4" output |
| Range | 100m (open field) |
Alerts regarding electric shock risk, advice against opening the unit, and warnings about fire or electric shock from moisture.
Lists radio approvals from various regions and provides a link to the CE Declaration of Conformity and California 65 Test Report.
Details compliance with FCC rules, including conditions for operation and potential interference.
Specifies that the transmitter must not be co-located or operated with any other antenna or transmitter.
Confirms compliance of the digital apparatus with Canadian ICES-003 standards.
Emphasizes the importance of carefully reading operating instructions before using the Xvive U2 Digital Wireless System.
Covers user service, avoiding damage, keeping away from heat/liquids, proper cleaning, using specified accessories, and safe listening practices.
Highlights Xvive U2's digital wireless technology, audio quality, latency, range, battery life, and compact design for musicians.
Lists the items included in the package: U2 Guitar Transmitter, U2 Guitar Receiver, USB cable, and Manual.
Illustrates connecting the transmitter to a guitar and receiver to audio equipment, confirming successful connection via LED indicators.
Explains powering on the system and verifying transmitter/receiver channel pairing using LED flashing patterns.
Details using the slide switch for power and interpreting red LED lights for power status and battery charge.
Guide to activating channel select, aligning transmitter/receiver channels, and using audio signal LED feedback.
Explains blue LED behavior for signal status on transmitter and receiver, including channel-specific flashing patterns.
Information about the USB port's function solely for battery recharging, not firmware upgrades.
Illustrates connecting power to the unit and socket, and provides charging times versus battery life data.
Recommendations for storing the unit at room temperature and checking battery state regularly.
Explains that the U2 operates within the 2.4GHz ISM band, utilized by various wireless devices globally.
Offers tips to minimize interference, such as maintaining distance from WiFi devices and changing channels.
Discusses the four channels, using multiple systems, and the portable plug-and-play design for flexibility.
Explains using multiple receivers with one transmitter and recommended placement for the U2 receiver relative to other devices.
Details the process of channel selection, its time limit, and how to activate the function again via double-clicks.
Explains the 'Y' cable for simultaneous charging, 5V output, and red LED behavior during charging and low battery.
Describes blue LED flashing indicating signal interference and suggests solutions like channel switching or changing location.
Provides guidance on antenna orientation for optimal signal and compatibility with different guitar pickup types.
Details the tuning bandwidth (2400-2483.5MHz) and working range (over 70 feet outdoors).
Specifies audio frequency response (20Hz-20KHz), dynamic range (>103dB), and sample rate (24bit/48K Hz).
Lists battery life (up to 5 hours), RF output power (10 mW), and input/output maximum levels.
Illustrates connecting the transmitter to Guitar/Bass and Piezo-electric Acoustic Guitar.
Shows connecting the receiver to Guitar Effects Pedal, Guitar AMP, Portable PA Systems, and Recorders.
To Next Page