Xvive U2 - Quick Start Guide; Connecting the Transmitter and Receiver; Powering On and Channel Check

or
or
QUICK START
05
1. Transmitter plugs into the Guitar (you instruments), the
receiver plugs into the effects pedal, AMP, Audio, etc.
2. Turn on the Transmitter and the receiver and check the
LED blue lights flashing times and make sure the blue
led lights have same flashing times which means
transmitter and receiver are in both same channels.
channels 1 flash once
channels 2 flash twice
channels 3 flash three times
channels 4 flash four times