Xylem HVL 2.015-4.220 User Manual

• Clear motor hours
• Clear operation time
P1110 FACTORY SET
P1110 FACTORY SET
Europe
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
Restores the factory settings. Possible settings are:
Setting Offset calculation
Europe Restore the factory setting for European versions.
USA Restore the factory setting for US versions.
For this parameter please note that, once entered into edit mode (by pressing the
provided push button), the user can confirm the new value by pressing for 3 sec the right
(►) push button.
P1120 PASSWORD 2
P1120 PASSWORD 2
0000
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
Enter the system password, which gives access to factory parameters.
For this parameter please note that, once entered into edit mode (by pressing the
provided push button), the user can confirm the new value by pressing for 3 sec the right
(►) push button.
P1125 CLR.ERRORS
P1125 CLR.ERRORS
ALL
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
Used to clear the error memory either (1-8) for one specific unit or ALL for all units in
Cascade Serial or Synchronous.
For this parameter please note that, once entered into edit mode (by pressing the
provided push button), the user can confirm the new value by pressing for 3 sec the right
(►) push button.
8 Programming
88 HVL 2.015-4.220 Installation, Operation, and Maintenance Manual

Xylem HVL 2.015-4.220 Specifications

General

Brand	Xylem
Model	HVL 2.015-4.220
Category	Water System
Language	English