Yaber U5 - Page 27

ftersales@yabertecl
4.How can | do if the image is blurry or out of shape?
*Adjust the focus and keystone ring by moving it leftward/rightward til it
shows the best images
*Place projector on a flat surface horizontally or vertically. An inclination of
any angle may result in blurry displays or uneven colors
*Darker environment suggested achieving the best projecting performance
“The eligible distance of 3.0ft - 11.5ft between the projector and projecting
screen/wall.
“Projecting wall or screen is clean white if possible.
5.How can | do if the image is up side down?
*Enter Menu-Picture-Projection Direction to flip the projection image accord-
ingly.
6.How can | do if the projection screen is not square or allied horizontally?
*Make sure the projector is placed on a flat surface with projector light in the
middle of the screen
*Make sure the projector screen is placed horizontally.
7.How can | do if there is color distortion?
*Make sure the video source has a fine resolution.
*Adjust the colors: enter Menu-Picture-Color Temperature, then select
different modes and adjust the value accordingly.
*Reset the projector to manufacturer setting: enter Menu-Option-Restore
Factory Default to reset.
8.How can | do if the remote is unresponsive?
*Make sure the batteries are installed correctly and the power is enough.
*The remote works with the projector through the IR receiver. The remote
works only when the IR receiver is within the direct reaction distance and will
be unresponsive if the IR receiver is blocked or covered.
25