Yaber V10 - Connecting External Devices; Connecting a USB Disk; Connecting via HDMI

Support@yabertech.com
SIGNAL LINES CONNECTION
'YABER V10 projector has 7 interfaces,HDMI ports*2/ USB ports*2/ 3.5mm
headphone output/ AV output/ VGA interface*1.Please select the correct
connecting port to connect your device(PC,Phone, DVD PlayerSound
bar,USB,PS4 etc.)
1.Connect USB Disk
1) Insert the U disk into either of the two usb input ports;
2) You can directly enter the start-up screen on the home page, select the
option [ Movie/Music/Photo/Office Suite]
3) Select the desired file (or folder to enter the subfolder) in the USB disk,
then press the [ OK ] button to play it.
2.Connect the Devices via the HDMI ports
1) Connect your TV stick or laptop to any HDMI port of the projector;
2) Enter the home page to select the corresponding HDMI1 or HDMI2 as the
signal source.
21