Plug the cigarette lighter adapter into the DC output port.
Connect to 12V DC devices.
Press the power button.
1
2
3
Car Electronic products such as car refrigerators and driving recorders work
intermittently during operation. If you need to power such electronic products through
a DC interface, please use the continuous output mode.
1. When the power is on and the flashlight is off, press the power button 3 times to
turn on the continuous output mode. In this mode, all output ports remain open
regardless of whether they are loaded, and the OUT icon will flash slowly. To
release this mode, press the power button 3 times.
2. In this mode, you can press and hold the power button for 3 seconds to turn on the
flashlight. To release the continuous output mode, you need to turn off the flashlight
first, and then press the power button 3 times.
About The Continuous Output Mode
LED LIGHTING
Lighting SOS OFFStrobe(white) Strobe (red)
Press the power
button for 3s
Press shortly
Press the power button for 3s
Press shortly Press shortly Press shortly
SPECIFICATIONS
YaberAuto YA100 Car
Jump Starter
PACKAGE CONTENT
Jumper Cables Clamps
Charging Cable
Model
Input
USB1 Output
USB2 Output
DC Output
Operating Temperature
YA100
5V/2A
5V/3A, 9V/2A, 12V/1.5A
5V/2.4A
12~16V/10A
-20°C~60°C/-4°F~140°F
EN01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
26 27 28 29 30
To Next Page
