13
Battery Indications:
Please refer to the diagram below for the battery indication.
Fully charged
Battery low
Battery is empty
Charging
Note: The Roadcam is designed to be powered on while the vehicle is
running. The built-in battery is only designed for storing documents when
the vehicle’s engine is off. The battery capacity of the built-in battery is
limited. Please connect the Roadcam to the vehicle’s on-board power
supply for daily use.
Camera Reset: If the camera is involved in an accident and requires
reset, simply hold the power button for 5 secs to power off, and then
press the power button to turn on the Roadcam.
To Next Page
