To Next PageTo Next Page
Need help?Do you have a question about the Yaesu 58-SCU and is the answer not in the manual?
Details operating systems, port requirements, and compatible transceivers for driver installation.
Step-by-step guide for downloading, extracting, and installing the virtual COM port driver software.
Instructions on connecting the cable and verifying successful driver installation via Device Manager.
Details operating systems, port requirements, and compatible transceivers for driver installation.
Step-by-step guide for downloading, extracting, and installing the virtual COM port driver software.
Instructions on connecting the cable and verifying successful driver installation via Device Manager.
The Yaesu WIRES-X Connection Cable Kit, comprising models SCU-57 and SCU-58, is designed to facilitate data transmission between compatible Yaesu transceivers and a computer. This kit is essential for users who wish to leverage the WIRES-X Portable Digital Node (PDN) function, enabling them to establish a digital node station and engage in more agile operation, particularly in mobile internet environments. The manual specifically addresses driver installation for Windows 8.1, Windows 10, and Windows 11 operating systems.
The primary function of the WIRES-X Connection Cable Kit is to provide the necessary hardware and software interface for a computer to communicate with a Yaesu transceiver. By installing the provided driver software, the cable enables data transmission, which is crucial for operating the WIRES-X PDN function. This function allows a compatible transceiver to act as a digital node, connecting to the WIRES-X network and facilitating digital voice communication over the internet. The kit essentially bridges the gap between the radio and the digital network, transforming a mobile transceiver into a portable gateway for WIRES-X.
The kit includes different components depending on the specific model:
The cables connect to the computer via a USB port, supporting both USB 1.1 and USB 2.0 standards. The driver software, identified as "PL23XX_Prolific_DriverInstaller_vXXX.zip", installs a virtual COM port driver, which is a standard method for serial communication over USB.
The WIRES-X Connection Kit SCU-57 is compatible with:
The WIRES-X Connection Kit SCU-58 is compatible with:
It's important to note that while the FTM-6000R/E can use programming software with SCU-58/SCU-40, it does not support the WIRES-X portable digital node function. This distinction highlights that cable compatibility does not always equate to full feature support across all transceivers.
The SCU-57/SCU-58 kit is designed for use with:
The SCU-39/SCU-40 kits, while using the same driver software, are not compatible with Windows 11. This specific limitation is crucial for users planning to operate on the latest Windows environment.
The primary usage feature is the ability to establish a WIRES-X Portable Digital Node. This allows users with compatible transceivers and an internet connection to set up a digital node station on the go, facilitating communication over the WIRES-X network. The installation process is straightforward, involving downloading a zip file, extracting its contents, and running an installer executable. The manual provides clear, step-by-step instructions for driver installation, including visual aids for identifying the correct files and buttons.
After the driver installation, users must confirm that the driver has been installed correctly and identify the assigned COM port number.
The manual does not detail specific maintenance features for the cable itself, as it is a passive component. However, the troubleshooting advice regarding driver reinstallation serves as a maintenance step for software-related issues. The emphasis on correctly installing the driver and verifying the COM port in Device Manager is crucial for ensuring the system functions as intended. Regular checks in Device Manager can help identify if the driver has become corrupted or if there are conflicts, prompting a reinstallation if necessary.
In summary, the Yaesu WIRES-X Connection Cable Kit (SCU-57/SCU-58) is a vital accessory for Yaesu transceiver owners looking to expand their communication capabilities through the WIRES-X Portable Digital Node function. Its primary utility lies in enabling seamless data exchange between the radio and a computer, facilitated by a robust driver installation process and clear instructions for setup and verification. Adherence to the installation guidelines and awareness of transceiver-specific limitations are key to successful operation.
General| Brand | Yaesu |
|---|---|
| Model | 58-SCU |
| Category | Cables and connectors |
| Language | English |
