Need help?Do you have a question about the Yaesu FC-700 and is the answer not in the manual?
General| Brand | Yaesu |
|---|---|
| Model | FC-700 |
| Category | Radio Antenna |
| Language | English |
Lists amateur bands and their corresponding frequencies.
Specifies the maximum insertion loss of the unit.
Identifies the type of antenna connector used.
Provides the physical size specifications of the unit.
States the weight of the FC-700.
Specifies the unit's input impedance.
Defines the maximum power handling capability.
Lists available power meter scales.
Specifies the SWR calibration range.
Describes the function of the SWR/power meter.
Explains the SWR meter sensitivity adjustment.
Details the SWR/PO and power scale selection switches.
Describes the TUNE control for capacitive coupling adjustment.
Explains the BAND selector for tuning inductor taps.
Covers the switch for selecting antenna or dummy load.
Describes the LOAD control for impedance coupling.
Describes the antenna connector.
Explains the ground connection.
Details the DC power input for the meter lamp.
Explains the input connection for the coaxial cable.
Setting up transceiver, selecting dummy load, initial controls, and meter calibration.
Adjusting TUNE for minimum SWR, then moving LOAD and re-tuning TUNE.
Adjusting to full power and verifying zero SWR deflection.
Switching to ANT and tuning the antenna system for minimum SWR.
Importance of not exceeding transmitter tune-up time limits.
Discussion on losses in coaxial cable due to SWR.
How the FC-700 ensures a 50-ohm load for transmitter protection.
Suggestion to record TUNE/LOAD positions or create labels.
List of parts for the main chassis.
List of parts for the relay unit.
List of parts for the switch A unit.
List of parts for the switch B unit.
List of parts for the CM coupler unit.
List of parts for the VR unit.
List of parts for the dummy load unit.
List of included accessories.
To Next Page