Yaesu FP-29 User Manual

YAESU FP-29
AC POWER SUPPLY
for the FT-1000MP MARK-V HF Transceiver
The FP-29 is an external AC power supply for use with the FT-1000MP MARK-V HF Transceiver, providing 30
Volts DC at up to 15 amperes for extended periods.
Excellent regulation and conservative design assure the owner of many years of trouble-free operation. A ther-
mally-switched cooling fan automatically activates during long periods of high current demand, to maintain a
safe operating temperature in the power supply.
Specifications
DC Output Voltage: +30 V , +13.8 V
DC Output Current: +30 V: 15A; +13.8 V: 3A
Input Voltage: AC 100-120V, 50 - 60 Hz
AC 200-240 V, 50 - 60 Hz
Current Consumption (Approx.): AC 100-120 V: 9 A, AC 200-240 V: 5 A
Operating Temperature Range: –10 °C ~ +50 °C
Case Size
(
W x H x D
):
106 x 135.5 x 331 mm
(4.2 x 5.3 x 13 inch)
Weight (Approx.): 3.2 kg (7 lbs)
Specifications are subject to change without notice or obligation.
Supplied Accessory
DC Power Cable: T9022299 (length: 2 meters) ............................................................................................1
AC Power Cable..........................................................................................................................................1
Operating Manual (this sheet) .....................................................................................................................1
Warranty Card ............................................................................................................................................1
YAESU MUSEN CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
YAESU U.S.A.
17210 Edwards Rd., Cerritos, CA 90703, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525 1118 ZN, Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
YAESU GERMANY GmbH
Am Kronberger Hang 2, D-65824 Schwalbach, Germany
YAESU HK LTD.
11th Floor Tsim Sha Tsui Centre, 66 Mody Rd.,
Tsim Sha Tsui East, Kowloon, Hong Kong
E A A 9 7 X 1 0 0
Visit http://www.fotango.org

Yaesu FP-29 Specifications

General

Output Voltage	13.8 V
Output Current	25 A
Input Voltage	AC 120 V
Cooling	Fan Cooled
Protection	Over Voltage, Over Current
Weight	17.6 lbs (8 kg)

Summary

YAESU FP-29 AC Power Supply Overview

Product Description

External AC power supply for FT-1000MP MARK-V HF Transceiver, providing 30V DC at up to 15A.

Key Specifications

Details DC output voltage/current, input voltage, current consumption, operating temperature, and dimensions.

Included Accessories

Lists the DC power cable, AC power cable, operating manual, and warranty card included with the unit.

Installation and Operation Guide

Installation Voltage Check

Verify rear panel voltage matches local supply to prevent internal circuit damage.

Connection Procedure

Connect AC power cable to FP-29 and outlet, then DC power cable to FP-29 OUTPUT and device.

Improper Voltage Warning

Warranty void if damage occurs due to improper supply voltage or fuse.

Power On/Off Sequence

Turn on FP-29 MAIN before FT-1000MP MARK-V; turn off FT-1000MP MARK-V POWER before FP-29 MAIN.

AC Mains Jumper Wiring

Procedure to change jumper wiring for voltage compatibility and fuse replacement.