Need help?Do you have a question about the Yaesu FT-2200 and is the answer not in the manual?
General| Frequency Range | 144-148 MHz |
|---|---|
| Mode | FM |
| Power Output | 50W |
| RF Power Output | 50W |
| Supply Voltage | 13.8 VDC |
| Voltage | 13.8 V DC |
| Weight (lbs) | 3.3 lbs |
| Weight (kg) | 1.5 kg |
General specifications of the FT-2200 radio, including physical and electrical parameters.
Technical specifications for the FT-2200 transmitter output and modulation.
Technical specifications for the FT-2200 receiver sensitivity and selectivity.
Description of the DIAL knob and main function buttons.
Details on the VOL and SQL controls for audio and squelch adjustment.
Information on microphone jack, power/mode buttons, and LCD display.
Description of rear panel connections for power, external speaker, and antenna.
Guidelines for selecting and using antennas with the FT-2200 for optimal performance.
Instructions for mounting the FT-2200 transceiver securely in a vehicle.
Information on power supplies, AC operation, and external speakers.
Details on compatible microphones and additional optional accessories.
Initial setup, squelch adjustment, and beeper control for basic operation.
Modes for selecting frequencies, channel steps, and using dial/MHz tuning.
Procedure for transmitting, using the Time-Out Timer, and managing repeater offsets/ARS.
Storing, recalling, tuning, masking memories, and various scanning modes.
Using priority channel monitoring and CTCSS tone functions.
DTMF paging, code squelch, auto-dial, delay, trigger pager, and auto-page functions.
Configuring ringer alerts, melodies, and memory-only display mode.
Enabling extended reception range and AM receive capabilities.
Introduction to DVS-3 and its voice system display format.
Understanding segmentation codes and procedures for recording messages with DVS-3.
Playing back recorded audio over the air and controlling the DVS-3 remotely.
Procedures for resetting the CPU and information on memory backup battery.
Guide for connecting Packet Radio TNCs to the FT-2200 for data communication.
Controlling the FT-2200 via an external computer using the CAT System.
Table detailing opcodes and parameters for CAT System commands.
Step-by-step guide for installing the DVS-3 Digital Voice Recorder unit.
Procedure for installing the FTS-27 Tone Squelch Unit into the FT-2200.
Summaries of button functions, levels, and power-on configurations.
Quick reference for DTMF paging, calling, and ringer settings.
Quick reference for general, scanning, and specific functions.
To Next Page
