Yaesu GS-232B User Manual

~~YAESU
GS-232B
Computer Control Interface
for Antenna Rotators
YAESU
COMPU I EM CONTROLLER
GS-232B
o
POWER
=1
.0.0
VERTEX STANDARD CO., LTO.
4-8-8 Nakameguro. Meguro·Ku Tokyo 153---8644, Japan
VERTEX STANDARO
us Headquarters
10900 Walker SHeet. Cypress, CA 90630, USA.
YAESU EUROPE B.V.
P O. Box 75525. 1118 ZN SChlphol The Netherlands
YAESU UK LTO.
Unit 12, Sun Valley Business Park, Wmnall Close
Winchester, Hampshire. 8023 OLB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139·141 HOI Bun Road.
Kwun Tong Kowloon, Hong Kong

Yaesu GS-232B Specifications

General

Type	Antenna Rotator Controller
Compatibility	Yaesu rotators
Interface	RS-232C
Power Supply	12 V DC
Control	Computer-controlled

Summary

General Description

Product Specifications

Calibration - DXA/DXC/SDX Series

Calibration - G-400 Series

Calibration - G-5400B/G-5600B Series

Calibration - G-5500 Series

Azimuth Offset Null Calibration

Calibrates azimuth offset for G-5500 by setting to 0° and using computer commands.

Azimuth A-D Calibration

Calibrates azimuth A-D converter for G-5500, adjusting rear panel potentiometer.

Calibration - G-500 Series

Elevation Offset Null Calibration

Calibrates elevation offset for G-500 rotator by setting to 0° and using computer commands.

Elevation A-D Calibration

Calibrates elevation A-D converter for G-500 using GX-500 and computer commands.

Command Reference - Rotation and Control

Command List: Rotation and Control Functions

Explains commands for clockwise/counter-clockwise rotation, stopping, and checking direction value.

Command List: Mode Switching and Status

Command Reference - Tracking and Angles

Command List: Speed and Azimuth Angle Setting

Explains commands for selecting rotation speed and turning to specific azimuth angles.

Command List: Timed Tracking and Execution

Details commands for setting timed tracking sequences and initiating the routine.

Command Reference - Data and Elevation

Elevation Control Commands

Details commands for setting elevation angles and timed tracking of azimuth-elevation pairs.

Command Reference - [H] Command Output

[H] Command Reference List

Command Reference - [H2]/[H3] Command Output

[H2] Command Reference List

[H3] Command Reference List