Do you have a question about the Yaesu SP980 and is the answer not in the manual?
transmission mode | UHF stereo |
---|---|
carrier frequency | 863 MHz |
operation voltage (transmitter) | DC 12.5V 150mA |
---|---|
operation voltage (speaker) | DC 12V 500mA |
battery type | 6 X ‘AA’ size Alkaline batteries |
frequency response | 40Hz – 12KHz |
---|---|
distortion | 1.5% |
S/N ratio | 50dB (typical) |
channel separation | 30dB (Typical) |
output power | 2 x 3.5W (RMS) |
operation distance | Up to 100 meters |
---|
Step-by-step instructions for installing the transmitter.
Procedure for connecting the transmitter to audio output jacks.
Instructions for powering the speaker receivers via batteries or adapter.
Guide on how to operate the volume knob for power control.
Steps for turning on the audio source and transmitter.
Solutions for common problems related to no audio output.
Solutions for common problems causing distorted audio.
Important warning regarding modifications and device operation compliance.