YAK-POWER YP-RP5WR User Manual

YP-RP5WR
Installation Instructions
(2020-01-15)
Southern Audio Services, Inc.
14763 Florida Blvd., Baton Rouge, La 70819
225-272-7135 or 800-843-8823
www.yak-power.com
southernaudioservices.com
YP-RP5WR
Installation Instructions
(2020-01-15)
General Warnings & Notations:
CAUTION:
Power button: Turns on/off all power to the switching system. When
activated keypad icons are backlit with a white light.
1 When pressed, button will activate pigtail 1 and turn red.
2 When pressed, button will activate pigtail 2 and turn red.
B When pressed, button will activate pigtail B (Bow) and turn red.
M When pressed, button will activate pigtail M (Midship) and turn red.
S When pressed, button will activate pigtail S (Stern) and turn red
All Yak-Power plug and play accessories are specifically designed to work together while maintaining
the correct battery polarity throughout the entire Yak Power system. Use of other aftermarket
connectors or splicing other connectors into the Yak-Power system may cause damage to the system or
to the accessories connected to the system and void your warranty.
Always pay attention to the actual wire colors of all Yak-Power accessory cables to insure that
the RED (+) wire is always connecting to the RED (+) wire on the connector into which it is being plugged.
S
1
2
B
M
YP-SP5W
YP-RP5W
S
2
B M
1
BUTTON FUNCTIONS:

YAK-POWER YP-RP5WR Specifications

General

Water Resistance	IP67
Operating Temperature	-20°C to 60°C
Warranty	1 year
Charging Temperature	0°C to 45°C
Recharge Time	5-6 hours
Input Voltage	12V
Output	5V/2.4A

Summary

General Warnings and Notations

System Warnings and Cautions

Provides essential warnings about accessory compatibility, polarity, and wire connections to prevent system damage.

Button Functions

Power and Accessory Button Operations

Details the operation of the main power button and accessory-specific buttons (1, 2, B, M, S) for system control.

Installation Diagrams

Under Hull Battery Installation

Illustrates the wiring and component placement for battery boxes installed under the hull.

External Battery Installation

Illustrates the wiring and component placement for battery boxes installed externally.

Output Attachment Options

Lists available power ports and 12VDC accessory power plugs for system expansion.