Do you have a question about the Yakima EXO WarriorWheels and is the answer not in the manual?
Brand | Yakima |
---|---|
Model | EXO WarriorWheels |
Category | Outdoor Cart |
Language | English |
Remove the knob and snaparound from the wheel assembly.
Install SnapArounds on the bar at the indicated locations.
Install front and rear wheels around the tubing and secure them.
Install SnapArounds, align handle, and thread bolts through snaparound and handle.
Install and fully tighten the knobs to secure components.
Refer to basket instructions to detach the EXO Gear Warrior from the EXO System.
Remove knobs, bolts, and SnapArounds securing the handle, then remove the handle.
Remove knobs securing the wheels, then remove the wheels.
Ensure secure mounting and follow product/vehicle instructions to prevent accidents.
Do not exceed maximum load capacity; distribute load uniformly with low center of gravity.
Adjust speed to load and conditions; vehicle handling changes with roof loads.
Clean with water and mild soap; remove rack when not in use for safety and economy.