Need help?Do you have a question about the Yale RH00336S and is the answer not in the manual?
General| Model | RH00336S |
|---|---|
| Brand | Yale |
| Category | Ventilation Hood |
| Voltage | 220-240V |
| Noise Level | 65 dB |
| Housing Material | Stainless Steel |
| IP Rating | IP20 |
| Installation | Wall-mounted |
| Duct Diameter | 150 mm |
General safety precautions for using the unit and handling hazardous materials.
Warnings and precautions to prevent range top grease fires.
Steps to take and precautions to prevent injury during a range top fire.
Safety guidelines for installation and electrical wiring of the unit.
Adherence to electrical codes and standards for safe installation.
Proper grounding, wiring practices, and circuit protection requirements.
Electrical supply requirements including voltage, current, and power consumption.
Components provided with the range hood unit.
Hardware included for installation and mounting.
Additional parts and tools required for installation.
Table showing equivalent lengths for various duct pieces used in calculations.
Recommendation for maximum ductwork length for optimal air movement.
Recommended minimum and maximum mounting heights for the hood above the range.
Guidelines for ductwork size, type, and installation configuration.
Procedures for inspecting the unit for damage and handling claims.
Critical warning against venting exhaust into wall cavities or attics.
Visual examples of different ducting methods, including roof and wall venting.
Detailed measurements and diagrams for the front and side views of the RH001 model.
Detailed measurements and diagrams for the top and back views of the RH001 model.
Detailed measurements and diagrams for the front and side views of the RH002 model.
Detailed measurements and diagrams for the top and back views of the RH002 model.
Detailed measurements and diagrams for the front and side views of the RH003 model.
Detailed measurements and diagrams for the top and back views of the RH003 model.
Important cautions regarding the weight and number of installers needed.
Step-by-step instructions for mounting the RH001 hood to the wall.
Instructions for connecting electrical wiring and attaching duct covers.
Important cautions regarding the weight and number of installers needed.
Step-by-step instructions for mounting the RH002 hood to the wall.
Instructions for electrical connections and duct cover installation.
Important cautions regarding the weight and number of installers needed.
Step-by-step instructions for mounting the RH003 hood to the wall.
Instructions for electrical connections and duct cover installation.
Explanation of how the hood functions in recirculating mode without ductwork.
Details on the required recirculating kit, its contents, and part numbers.
Step-by-step guide for installing the recirculating kit and components.
How to operate the blower, including turning it on and off.
How to select different speed levels for the blower.
How to control the hood's lighting system, turning it on and off.
Guidelines for cleaning the hood's surface using appropriate detergents.
Information on the purpose and cleaning of stainless steel mesh filters.
Instructions on how to remove the stainless steel mesh filters for cleaning.
Safety precautions related to hot light bulbs during replacement.
Step-by-step guide for replacing the hood's light bulbs.
Details on the type and wattage of replacement light bulbs.
Solutions for common problems when the range hood does not turn on.
Troubleshooting steps for motor problems and lighting issues.
Solutions for issues related to hood vibration, venting, and mesh filters.
Electrical wiring diagram for the RH00130S and RH00136S models.
Electrical wiring diagram for the RH00230G and RH00236G models.
Electrical wiring diagram for the RH00330G, RH00336G, and RH00336S models.
Available replacement parts, including light bulbs.
Optional accessories like recirculating kits and charcoal filters.
Information on duct cover extension kits for higher ceilings.
To Next Page