Troubleshooting 2200 YRM 1067
Dash Display
Controller LED Handset or PC
AL94 OFF NONE
CONDITION
Controller is installing hourmeter memory from MDI
display if controller has been replaced.
TRUCK RESPONSE
Traction and hydraulic functions disabled for 1 minute.
POSSIBLE CAUSES AND TEST PROCEDURES
• No fault is occurring.
Controller will send hourmeter data to MDI and
truck will operate as soon as transfer is complete.
Wait approximately 60 seconds.
LOGIC
Synchronize hourmeter
data between MDI and controller.
32
To Next Page
Loading...
Need help?
General
