Need help?Do you have a question about the Yamaha 2003 FJR1300 and is the answer not in the manual?
General| Bore x Stroke | 79.0mm x 66.2mm |
|---|---|
| Compression Ratio | 10.8:1 |
| Fuel System | Fuel injection |
| Ignition | Digital TCI |
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Suspension | Telescopic fork |
| Front Tire | 120/70-ZR17 |
| Rear Tire | 180/55-ZR17 |
| Rear Brakes | 282mm disc |
| Wheelbase | 60.8 in |
| Seat Height | 805 mm (31.7 inches) |
| Fuel Capacity | 6.6 gallons |
| Curb Weight | 264 kg (582 lb) |
| Length | 2230mm (87.8 inches) |
| Width | 29.5 in |
| Engine Type | 1298cc, liquid-cooled, inline 4-cylinder, DOHC, 16 valves |
| Rear Suspension | Single shock |
Provides detailed specifications for the engine, including type, displacement, and oil.
Specifies tightening torque values for various chassis parts and bolts.
Lists recommended checks and lubrication intervals based on odometer reading and time.
Provides steps and notes for installing the fuel pump, emphasizing gasket and torque.
Outlines the steps and parts list for disassembling the front cowling assembly.
Provides steps for removing the front wheel, brake calipers, and discs.
Details the disassembly procedure for the rear wheel and its components.
Outlines the removal procedure for the rear brake master cylinder and related parts.
Introduces Yamaha ABS features and provides an overview of the ABS layout.
Describes ABS control, wheel slip, and operational modes.
Details electronic ABS features and presents the ABS system block diagram.
Explains wheel sensors, sensor rotors, and the ABS warning light function.
Describes ABS control in ECU (ABS) as hydraulic control and self-diagnosis.
Details ABS operation during normal and emergency braking scenarios.
Explains how to use malfunction codes to identify ABS problems and check points.
Detailed troubleshooting for specific ABS malfunction codes.
Details measuring resistance for solenoid valves and checking ABS motor continuity.
Step-by-step procedure for bleeding the ABS brake system.
Detailed steps for bleeding the ABS brake system, including hose connections and bleed screw.
Details the process for registering keys with the immobilizer system.
Guides on diagnosing ABS warning light states: not on, flashing, on for 0.5s, or always on.
Troubleshooting steps for immobilizer system failure, checking fuses, battery, switch, and wiring.
To Next Page
