Need help?Do you have a question about the Yamaha FZS1000 2003 and is the answer not in the manual?
General| Compression Ratio | 11.4:1 |
|---|---|
| Transmission | 6-speed |
| Final Drive | Chain |
| Frame | Aluminum Deltabox |
| Front Tire | 120/70-ZR17 |
| Width | 750 mm |
| Maximum Power | 143 hp @ 10, 000 rpm |
| Maximum Torque | 106 Nm @ 7, 500 rpm |
| Ignition | Digital |
| Front Suspension | Telescopic forks |
| Rear Suspension | Swingarm |
| Rear Brakes | 245mm disc, 1-piston caliper |
| Rear Tire | 180/55 ZR17 |
| Length | 2, 140 mm |
| Height | 1, 210 mm |
| Seat Height | 820 mm |
| Wheelbase | 1, 450 mm |
| Fuel Capacity | 21 liters |
| Dry Weight | 208 kg |
| Engine Type | 998cc, liquid-cooled, 4-stroke, DOHC, 20 valves, inline-4 |
| Fuel System | Fuel Injection |
Overview of major sections including Specifications, Checks, Carburetors, Electrical, and Troubleshooting.
Procedure to check the free play of the clutch cable at the lever.
Steps to adjust clutch cable free play using handlebar and engine side adjusters.
Procedure for checking throttle position sensor resistance.
Procedure to check the throttle position sensor angle and input voltage.
Steps to adjust the throttle position sensor angle and output voltage.
Specifies resistance values for the throttle position sensor.
Specifies the acceptable input voltage range for the sensor.
Specifies the acceptable output voltage range for the sensor.
Instructions for checking switches for damage, connections, and continuity.
Lists common issues and checks for lighting system failures.
Guides on checking and replacing the main switch if it fails.
Guides on checking and replacing dimmer and pass switches.
Steps to diagnose why the headlight or high beam indicator is not working.
Steps to diagnose why the tail/brake light is not working.
Steps to diagnose why the meter light is not working.
Lists and numbers all components shown in the wiring diagram.
Provides a key for wire colors used in the diagram.
To Next Page
