Need help?Do you have a question about the Yamaha FZS1000(N) 2001 and is the answer not in the manual?
General| Displacement | 998 cc |
|---|---|
| Bore x Stroke | 74.0 mm x 58.0 mm |
| Compression Ratio | 11.4:1 |
| Fuel System | Fuel Injection |
| Transmission | 6-speed |
| Seat Height | 820 mm |
| Fuel Capacity | 21 liters |
| Rear Suspension | Swingarm (link suspension) |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 180/55 ZR17 |
| Wheelbase | 1, 450 mm |
| Dry Weight | 208 kg |
| Final Drive | Chain |
| Frame | Aluminium Deltabox |
| Starter | Electric |
| Engine Type | Liquid-cooled, 4-stroke, DOHC, 5-valve, inline-4 |
| Power | 143 hp @ 10, 000 rpm |
| Torque | 106 Nm @ 7, 500 rpm |
| Ignition | Digital TCI |
| Front Suspension | Telescopic fork |
| Front Brake | Double disc, Ø 298 mm |
| Rear Brake | Single disc, Ø 245 mm |
| Ground Clearance | 140 mm |
| Valves | 20 valves |
Lists specific tools with part numbers and illustrations required for servicing.
Details engine type, displacement, bore, compression, fuel, and oil specifications.
Outlines specifications for wheels, tires, frame, suspension, steering, and drive chain.
Lists specifications for system voltage, ignition, charging, battery, and lighting systems.
Specifies torque values for various fasteners and assemblies throughout the manual.
Identifies lubrication points and recommended lubricant types for engine and chassis components.
Provides a table outlining recommended checks and maintenance jobs at various odometer readings and intervals.
Details checks and adjustments for chassis components such as brakes, steering head, forks, and tires.
Outlines checks and maintenance for the electrical system, including battery, fuses, and lights.
Covers removal, disassembly, checking, assembly, and static balancing of the front wheel and brake discs.
Details removal, checking, and installation of the rear wheel and brake disc, including drive hub.
Explains replacement of brake pads, master cylinders, and calipers for both front and rear brakes.
Covers removal, disassembly, checking, and adjustment of the front fork legs, including spring preload and damping.
Covers removal, checking, and installation of the steering head components, including bearings.
Provides information on handling, disposal, removal, checking, and installation of the rear shock absorber assembly.
Details procedures for removing, checking, and installing the swingarm and drive chain, including maintenance.
Covers general engine removal and installation procedures, including drive sprocket and exhaust pipe.
Details procedures for cylinder head covers, camshaft removal, checking, and installation, including timing.
Covers removal, checking, and installation of the cylinder head, including valve seats and guides.
Details removal, checking, and installation of valves, springs, guides, and seats, including lapping.
To Next Page