Need help?Do you have a question about the Yamaha YZ250 2001 and is the answer not in the manual?
General| Displacement | 249 cc |
|---|---|
| Bore x Stroke | 66.4 mm x 72.0 mm |
| Compression Ratio | 8.9:1 |
| Fuel System | Keihin PWK38S carburetor |
| Ignition | CDI |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Tire | 80/100-21 |
| Rear Tire | 110/90-19 |
| Engine Type | 2-stroke |
| Front Suspension | 46mm telescopic fork |
| Rear Suspension | Swingarm, 12.4 inches travel |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Wheelbase | 58.3 inches |
| Seat Height | 39.4 in. |
| Dry Weight | 212 lbs |
| Fuel Capacity | 2.1 gallons |
| Width | 32.5 in. |
| Ground Clearance | 14.2 in. |
| Height | 51.4 in. |
Explains symbols used in the manual.
Instructions for cleaning the motorcycle before maintenance.
Emphasizes maintaining a clean environment for efficient work.
Guidance on properly supporting the motorcycle on a stand.
Steps to loosen bolts on the forks prior to wheel removal.
Instructions for safely removing the axle and wheel from the forks.
Procedures for detaching the wheel from the fork assembly.
Detailed steps for removing the tire from the wheel rim.
Examination of crucial wheel parts like the tire, tube, and rim.
Guidance on correctly installing the inner tube into the tire.
Steps for mounting the tire back onto the wheel rim.
Procedure for fitting the reassembled wheel back between the forks.
Instructions for tightening the fork bolts after wheel installation.
Method to check wheel balance and assembly correctness.
Procedure to verify the functionality of the front brake system.
Test to ensure the motorcycle can stand stable after reassembly.
Check to confirm the tire is holding the correct air pressure.
To Next Page
