Need help?Do you have a question about the Yamaha YZ250(N)/LC and is the answer not in the manual?
General| Displacement | 249cc |
|---|---|
| Ignition | CDI |
| Final Drive | Chain |
| Bore x Stroke | 66.4mm x 72.0mm |
| Fuel System | Keihin PWK38S |
| Fuel Capacity | 2.1 gallons |
Read manual carefully before operating; attain knowledge of controls and features; receive training in safe riding techniques.
Guidelines for safe operation including rider experience, protective gear, maintenance, and proper use.
Explanation of the Safety Alert Symbol and WARNING/CAUTION/NOTE indicators.
Crucial information before maintenance or operation, including part usage and handling.
Instructions for starting cold and warm engines, and essential break-in procedures for optimal performance.
Technical specifications for engine, chassis, electrical, and brake systems, including limits and service data.
Schedule for regular maintenance tasks based on operating hours or time intervals.
Essential checks and maintenance tasks to ensure the machine is in good operating condition before use.
Inspection and maintenance procedures for engine components like piston, rings, cylinder, and clutch.
Procedures for adjusting brake levers/pedals, lubricating pivots, checking discs, fluid levels, and bolts.
Procedures for inspecting, adjusting, and replacing fork oil and oil seals.
Procedures for inspecting, adjusting, lubricating, and retightening the rear shock absorber.
Procedures for disassembly, inspection, and assembly of cylinder head, cylinder, and piston.
Procedures for disassembly, inspection, and assembly of the clutch and primary driven gear.
Details on fork travel, spring length, spring rate, optional springs, oil capacity, level, grade, and dimensions.
Details on shock absorber travel, spring length, spring rate, optional springs, and gas pressure.
Specifications for front disc brake including outside diameter, thickness, pad thickness, master cylinder, and caliper details.
Specifications for rear disc brake including outside diameter, deflection limit, pad thickness, and master cylinder details.
Guidance on adjusting rear suspension setting based on rider feel and circuit conditions, covering spring preload and damping force.
To Next Page
