Need help?Do you have a question about the Yamaha Royal Star Venture 2001 and is the answer not in the manual?
General| Bore x Stroke | 79 x 66mm |
|---|---|
| Compression Ratio | 10.0:1 |
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Suspension | Telescopic fork |
| Front Brake | Dual disc |
| Rear Brake | Single disc |
| Front Tire | 150/80-16 |
| Rear Tire | 150/90-15 |
| Seat Height | 29.1 in |
| Displacement | 1294cc |
| Fuel System | Mikuni BD28 carburetors |
| Ignition | Digital |
| Rear Suspension | Swingarm |
| Wheelbase | 66.5 in |
| Horsepower | 97 hp |
| Torque | 121 Nm (89 lb-ft) @ 4750 rpm |
| Width | 970mm (38.2 inches) |
| Ground Clearance | 140mm (5.5 inches) |
List of parts to be installed that were included in the shipping crate.
Specifies torque values for critical fasteners and components during assembly.
Procedure for checking oil level and specifications for recommended engine oil.
Procedure for inspecting brake fluid level and recommended fluid type.
Warnings about fluid compatibility, mixing, and water contamination.
Procedure for inspecting clutch fluid level and recommended fluid type.
Warnings about fluid compatibility, mixing, and water contamination.
Conditions requiring brake system bleeding, such as disassembly or low fluid.
Detailed steps for bleeding air from the hydraulic brake system.
Conditions requiring clutch system bleeding, such as disassembly or low fluid.
Detailed steps for bleeding air from the hydraulic clutch system.
Detailed steps for filling the battery with electrolyte, including safety precautions.
Information on correct electrolyte level, specific gravity, and potential issues.
Torque values for engine mounting, spark plug, and oil drain plug.
Torque values for chassis parts like brackets, handlebars, and frame components.
Torque values for fender, frame, footrests, and brake components.
Torque values for wheel axles, brake calipers, and discs.
To Next Page