Need help?Do you have a question about the Yamaha 2011 V Star XVS650A and is the answer not in the manual?
General| Displacement | 649 cc |
|---|---|
| Compression Ratio | 9.0:1 |
| Fuel System | Fuel injection |
| Transmission | 5-speed |
| Final Drive | Belt |
| Front Suspension | Telescopic fork |
| Rear Brake | Drum |
| Front Tire | 130/90-16 |
| Rear Tire | 170/80-15 |
| Engine Type | V-twin |
| Bore x Stroke | 81.0mm x 63.0mm |
| Fuel Delivery | Electronic |
| Ignition | TCI |
| Front Brake | Single disc |
| Ground Clearance | 130 mm |
Displays tire pressure specifications for XVS650A and XVS650AA models.
Emphasizes owner's responsibility for safe motorcycle operation and rider qualifications.
Provides essential advice on visibility, awareness, and rider skill for safe motorcycle operation.
Details the importance and types of protective clothing for rider safety.
Warns about the dangers of carbon monoxide from exhaust and provides safety measures.
Advises on safe weight distribution and maximum load limits for motorcycle stability.
Warns about potential safety hazards from non-genuine parts and modifications.
Explains the vehicle's anti-theft immobilizer system and key usage.
Warns about gasoline flammability and safe refueling procedures.
Details the functions of the ignition circuit cut-off system for safety.
Provides a procedure to test the functionality of the ignition circuit cut-off system.
Outlines pre-operation checks for the fuel system, including level and lines.
Details pre-operation checks for engine oil level and potential leakage.
Lists pre-operation checks for the front brake system, including operation and pads.
Outlines pre-operation checks for the rear brake system, including operation and pedal play.
Details pre-operation checks for clutch operation and cable play.
Explains checks for throttle grip operation and cable free play.
Outlines checks for wheel damage, tire condition, tread depth, and air pressure.
Provides a step-by-step guide for starting and warming up a cold motorcycle engine.
Outlines the procedure for starting a warm motorcycle engine.
Explains how to shift gears and the importance of clutch use.
Details the critical break-in period and recommended practices for engine longevity.
Stresses the significance of regular inspection, adjustment, and lubrication for safety and efficiency.
Lists maintenance tasks related to emission control at different odometer readings.
Provides a comprehensive chart for general maintenance and lubrication intervals.
Explains how to change engine oil and replace the oil filter element.
Provides instructions for checking and changing the final gear oil.
Covers checking engine oil level and replacing the oil filter element.
Step-by-step guide for draining and refilling engine oil.
Details the process of replacing the oil filter element and related parts.
Explains how to check and change the final gear oil level.
Provides instructions for draining and refilling the final gear oil.
Emphasizes checking tire air pressure before each ride for safety.
Lists recommended tire air pressures for different load conditions.
Explains how to check brake pads and shoes for wear.
Guides on checking brake fluid level and related safety precautions.
Outlines procedures for changing brake fluid and replacing seals/hoses.
Guides on removing and installing the front wheel.
Details the procedure for removing and installing the rear wheel.
Provides specific steps for installing the rear wheel assembly.
Offers guidance on troubleshooting common engine starting problems.
Presents a chart for diagnosing engine issues related to fuel, compression, ignition, and battery.
To Next Page