To Next Page
J
Jasmine HaysSep 6, 2025
How to setup Yamaha Outboard Motor tachometer to show the oil pressure?
- JJennifer BrownSep 6, 2025
Select the oil press. display.
How to setup Yamaha Outboard Motor tachometer to show the oil pressure?
Select the oil press. display.
What to do if the Yamaha 3AMH Outboard Motor gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Why Yamaha Outboard Motor illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
How to fix Yamaha 3AMH Outboard Motor tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
What causes Yamaha 3AMH Outboard Motor fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
What to do if Yamaha 3AMH gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
What to do if my Yamaha 3AMH Outboard Motor speedometer shows the incorrect fuel level?
If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
What does it mean when my Yamaha Outboard Motor gauge shows “----”?
If the gauge shows “----”, it indicates that the digital signal is not being received. Make sure the couplers are securely connected and replace any damaged bus wires or hubs.
Why Yamaha 3AMH boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
What causes Yamaha 3AMH gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
General| Brand | Yamaha |
|---|---|
| Model | 3AMH |
| Category | Outboard Motor |
| Language | English |
Details the step-by-step process for safely uncrating the outboard motor from its steel frame.
Provides guidance on correctly mounting the outboard motor onto the boat transom.
Lists propeller applications for various engine models in 2014.
Provides engine RPM ranges for Wide-Open-Throttle operation to select the correct propeller.
Details the 703 side mount mechanical remote control, its functions, and included parts.
Details the 704 binnacle mount mechanical remote control, including lever and control box types.
Details the 6X3 concealed mechanical remote control, suitable for runabout boats.
Details the 6X5 binnacle mount mechanical remote control designed for triple engine applications.
Details the 6X6 binnacle mount electronic remote control, eliminating mechanical cables.
Explains the procedure for selecting DEC engines for the remote control unit.
Details the 6X7 concealed electronic remote control, requiring no mechanical cables.
Guides on selecting the correct remote control cable length based on boat routing.
Details the procedure for adjusting throttle cable free-play for proper remote throttle control.
Describes the features and functions of the 6X4 multi-function tiller handle.
Details steering friction adjustment procedures and torque specifications.
Provides procedures for mounting various gauges, including analog and digital types.
Details analog tachometer applications, dimensions, and pole number setup.
Details digital tachometer applications, dimensions, and pole number setup.
Lists speedometer types, applications, dimensions, and setup procedures.
Explains the setup procedure for digital speedometers using toggle dipswitches.
Details fuel management gauge functions, applications, kit contents, and wiring.
Provides instructions for correctly locating and installing the fuel sensor.
Explains wiring connections for fuel management gauges and with speedometers.
Explains the setup procedure for fuel management gauges, including compensation settings.
Provides the procedure for initial setup of digital network gauges.
Lists common gauge issues, their causes, and recommended measures for resolution.
Lists recommended batteries for 4-stroke and 2-stroke engines, including capacity and rating.
Explains battery wiring for isolator-equipped models, single battery, and twin battery configurations.
Recommends battery switch capacity based on engine starting current.
Shows the net capability to charge a battery for various engine models.
