Why does my Yamaha 75AET Outboard Motor fuel management gauge show incorrect fuel consumption?
If the fuel management gauge shows incorrect fuel consumption, the engine recognition may be wrong. To resolve this, default the engine number. Then, turn the key switch on in order from the portside engine to re-memorize each engine number.
Why is the illumination not lighting on my Yamaha 75AET gauge?
If the illumination isn't lighting, it could be because of a power issue or a damaged gauge. You should try replacing the fuse, ensuring the couplers are securely connected, replacing any damaged wires or hubs, or replacing the gauge.
What to do if my Yamaha Outboard Motor gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or replace the gauge itself.
How to troubleshoot Yamaha 75AET Outboard Motor PTT relay?
If the PTT relay on your Yamaha Outboard Motor isn't working, it could be due to a short, open, or loose connection in the wiring harness; check the wiring harness for continuity. Another possibility is a PTT relay malfunction, so check the PTT relay itself.
What to do if Yamaha 75AET Outboard Motor PTT motor does not operate?
If the PTT motor on your Yamaha Outboard Motor isn't working, start by checking the battery terminal for loose connections. Also, ensure the battery isn't discharged. Inspect the fuse (20A) to see if it has blown. Then, check the PTT motor lead and ground circuit for any shorts, opens, or loose connections. Finally, if none of those are the cause, you may need to disassemble and check the PTT motor itself for a malfunction.
What to do if Yamaha 75AET Outboard Motor fuel management gauge shows incorrect fuel consumption?
If the fuel management gauge shows incorrect fuel consumption, the engine recognition might be wrong (especially for multi-applications). To fix this, default the engine number and turn the key switch on in order from the portside engine to re-memorize each engine number.
How to setup Yamaha 75AET Outboard Motor tachometer to show the oil pressure?
Select the oil press. display.
Why Yamaha 75AET Outboard Motor boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
What to do if Yamaha 75AET Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
What causes Yamaha 75AET gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
Step-by-step guide for safely removing the outboard motor from its crate.
Procedures and considerations for securely mounting the outboard motor onto the boat transom.
Guidance on choosing the correct propeller based on boat type and operating conditions.
Tables listing propeller applications for various engine models and horsepower ratings.
Overview of throttle control systems (Push To Open/Pull To Open) and applicable models.
Description of the multi-function tiller handle and its electrical functions.
Procedures for installing gauges, including angle and clearance requirements.
Information on analog tachometers, including applications and models.
Details on digital tachometers, including applications and connection diagrams.
Information on speedometer types, applications, and calibration.
Functions, applications, and kit contents for the fuel management gauge.
Information on analog trim meters, including applications, dimensions, and adjustment.
Details on coolant pressure meters, including applications and installation.
Information on coolant temperature meters, including applications and installation.
Details on hour meters, including applications, dimensions, and wiring.
Overview of square style gauge applications and their display features.
Application details for the premium gauge with TFT-LCD screen.
Wiring diagrams for dual and triple engine configurations with 6Y9 gauges.
Guidance on selecting suitable batteries based on engine model and capacity ratings.
Wiring examples for single and twin engine applications, including isolator usage.
General| Brand | Yamaha |
|---|---|
| Model | 75AET |
| Category | Outboard Motor |
| Language | English |
To Next Page
