For your safety – pre-operation checks
7-2
7
Rear brake
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
9-20, 9-21
Throttle grip
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca-
ble and grip housing.
9-17, 9-24
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
9-23
Wheels and tires
•Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
9-18, 9-19
Brake levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
9-24
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
9-25
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
6-17
ITEM CHECKS PAGE
UBF6EYE0.book Page 2 Friday, July 14, 2017 3:39 PM