4-7
MAINTENANCE & CARE 4
Maintenance Interval
Initial
Thereafter
Every
Page
10
hours
50
hours
100
hours
100
hours
200
hours
6
months
12
months
12
months
24
months
Spark plug
Inspection/Cleaning/
Adjustment
Grease points Greasing
4-8
Bearing housing Greasing
*1
*2
*2
4-9
Fuel system Inspection
4-10
Fuel filter Checking/Replacement
Fuel pump screen Cleaning
Air filter Inspection/Replacement
4-12
Engine oil Replace
Engine oil filter Replace
Valve clearance Inspection/Adjustment
Cooling-water
passages
Cleaning/Flushing
(after
every
use)
4-1
Bilge strainer Cleaning
Impeller Inspection
Steering cable Inspection
4-12
Throttle cable Inspection/Adjustment
Reverse gate
mechanism
Inspection
Sacrificial anode
Checking/
Replace as needed
(after
every
use)
4-14
Drain plugs Inspection/Replacement
Battery Inspection
(Inspect
fluid level
before
every
launch)
4-15
Rubber coupling
Bolts and nuts Retightening
PERIODIC INSPECTION CHART
Frequency of maintenance operations may be adjusted according to the operating conditions, but the
following table gives general guidelines.
Indicates the checkups which you may do yourself.
Indicates work to be done by your Yamaha dealer.
*1 Grease capacity: 33.0 ~ 35.0 cc (1.11 ~ 1.18 oz.)
*2 Grease capacity: 6.0 ~ 8.0 cc (0.20 ~ 0.27 oz.)
To Next Page
Loading...
Need help?
General