EasyManua.ls Logo

Yamaha ATS-1070 Quick Start Guide

Yamaha ATS-1070
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Before using the sound bar, make sure you have received all of the following items.
Install the sound bar on the TV stand, etc.
The sound bar can also be mounted on a wall, using the included
mounting template and commercially available screws. Refer to the
Owner’s Manual for additional installation instructions.
Supplied items
ATS-1070 Quick Start Guide
UA
EN
Sound bar (ATS-1070)
Remote control
A CR2025 Lithium battery
has already been inserted
into the remote control.
Optical digital audio cablePower cable
Mounting template
Use when mounting the sound bar on a wall
Spacers × 2
Use when mounting the
sound bar on a wall
Owner’s Manual
Analog audio cable
(RCA plug (L/R)-3.5 mm
mini plug cable)
Quick Start Guide
(This sheet)
Preparing the remote control
Remove the battery’s insulating strip before
attempting to use the remote control.
Battery’s insulating strip
Installation
Touch panelRemote control sensor
NOTICE
Do not stack the sound bar and a BD player or other device directly on each other.
Doing so may cause a malfunction due to vibrations.
Published 04/2017 KS-A0
Manual Development Group
© 2017 Yamaha Corporation
AV16-0019
— 1 —

Other manuals for Yamaha ATS-1070

Question and Answer IconNeed help?

Do you have a question about the Yamaha ATS-1070 and is the answer not in the manual?

Yamaha ATS-1070 Specifications

General IconGeneral
Wi-Fi-
HDMI in1
USB portYes
HDCP version2.2
Bluetooth codecSBC, AAC
Bluetooth version4.1+EDR
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technologyWireless
Woofer diameter54 mm
Tweeter diameter25.4 mm
Number of speakers6
Soundbar speaker RMS power60 W
Woofer diameter (imperial)2.1 \
Tweeter diameter (imperial)1 \
Subwoofer locationBuilt-in
Woofer diameter (subwoofer)3 \
Audio decodersDTS Digital Surround, Dolby Digital, Dolby Pro Logic II
Equalizer modesGame, Movie, Music, Sport, TV
RMS rated power120 W
Audio output channels- channels
Power consumption (standby)0.8 W
Power consumption (typical)27 W
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth130 mm
Width889 mm
Soundbar weight3401 g

Related product manuals