To Next PageTo Next Page
Need help?Do you have a question about the Yamaha Audiogram 6 and is the answer not in the manual?
General| Type | USB Audio Interface |
|---|---|
| Input Channels | 2 |
| Output Channels | 2 |
| USB Interface | USB 2.0 |
| Connectivity | USB |
| Compatibility | Windows, Mac |
| Outputs | 2 x TRS |
| Phantom Power | Yes (+48V) |
| Sample Rate | 48 kHz |
| Bit Depth | 16-bit, 24-bit |
Details regarding FCC regulations, warnings, and compliance for US users.
Essential safety guidelines to prevent injury, electric shock, damage, or fire.
Precautions for device placement, movement, and careful handling to prevent damage.
Explains connection via USB, driverless operation, and data transfer.
Details Cubase AI software, compression, and 48V phantom power capabilities.
Lists the items provided with the AUDIOGRAM 6 package.
Step-by-step instructions for installing the included DAW software.
Guide on how to physically connect the device to your computer and audio sources.
Procedures for safely turning on the interface and connected audio equipment.
How to set gain and master levels for optimal signal without clipping.
Steps for setting up Cubase AI and performing audio recordings.
Instructions for mixing down recorded tracks and exporting audio files.
Details the various input (MIC/INST, LINE) and output (PHONES, STEREO OUT) connectors on the device.
Covers the MIC/INST switch and GAIN control for adjusting input signal levels.
Explains the COMP control for dynamics and MONO/STEREO switch for channel routing.
Details LEVEL controls, PEAK indicators, and POWER indicator for signal monitoring and status.
Describes DAW and Master Level controls, plus the USB connector for computer interface.
Explains the PHANTOM +48V switch for powering condenser microphones.
Solutions for the interface not turning on or the system not working properly.
Addresses issues with input ports not showing, no sound, or low recording levels.
Technical details including jacks, controls, indicators, power, and dimensions.
Visual representation of the unit's physical dimensions and layout.
Schematic representation of the audio signal flow and levels within the device.
Details on the included DAW software, installation, and registration.
Information on where to find support for the bundled DAW software.
