Yamaha BIG BEAR YFM400FPR User Manual

4-13
1. Lights switch “ //OFF”
2. Engine stop switch “”/“”
3. Start switch “”
4. Horn switch “”
1. Contacteur d’éclairage “ //OFF”
2. Coupe-circuit du moteur “ ”/“ ”
3. Contacteur du démarreur “”
4. Contacteur de l’avertisseur “”
1. Interruptor de luces “ //OFF”
2. Interruptor de paro del motor “”/“”
3. Interruptor de arranque “”
4. Interruptor de la bocina “”
EBU00053
Handlebar switches
EBU00849
Engine stop switch “”/“”
Make sure that the engine stop switch is in the
“” position. The engine stop switch controls ig-
nition and can be used at all times to stop the en-
gine, especially in an emergency. The engine will
not start or run when the engine stop switch is
turned to “”.
EBU00607
Start switch “”
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
See starting instructions prior to starting the
engine on page 6-3.
U4SH6A.book Page 13 Thursday, May 30, 2002 1:25 PM

Yamaha BIG BEAR YFM400FPR Specifications

General

Brand	Yamaha
Model	BIG BEAR YFM400FPR
Category	Offroad Vehicle
Language	English