Need help?Do you have a question about the Yamaha DG130 and is the answer not in the manual?
General| Type | Guitar Amplifier |
|---|---|
| Speaker Size | 12 inches |
| Channels | 2 (Clean |
| Effects | Reverb, Chorus, Delay |
| EQ | 3-band (Bass, Middle, Treble) |
US FCC regulations for digital devices and potential interference.
Canadian ICES-003 compliance for digital apparatus.
Warnings regarding lithium battery handling, replacement, and disposal.
Instructions for safe connection of the power plug and cord in the UK.
Essential precautions for using electrical products safely.
Importance of grounding and methods to prevent electrical shock.
Guidelines for proper ventilation and avoiding environmental hazards.
Restrictions on use in wet locations and advice on accessories.
Introduction to Yamaha DG Series Digital Guitar Amplifiers and their features.
Details on S412V and S112 enclosure specifications.
Avoiding damage by limiting use in adverse environmental conditions.
Safety measures before connecting devices or performing service.
Information on the backup battery, its lifespan, and replacement.
Description of INPUT and TRIM controls for guitar connection and level matching.
Explanation of OUTPUT, GAIN, MASTER, and Tone Controls.
Details on Reverb, Amp Select, Mode, and Effect controls.
Controls for storing, recalling settings, and power.
Description of SPEAKER, MIDI OUT, and MIDI IN jacks.
Explanation of SEND/RETURN jacks for external effectors.
Details on LINE OUT and LINE OUT LEVEL controls.
Requirements for connecting speakers to the DG100-212A.
Requirements for connecting speakers to DG80-210A/DG80-112A.
Requirements for connecting speakers to the DG130HA.
Explanation of series and parallel speaker impedance.
Steps to connect and achieve initial sound output from the amplifier.
How to adjust the guitar's output level for optimal amplifier input.
Guidance on selecting amp types, tone controls, reverb, and other effects.
Steps to recall saved sound settings from memory.
Procedure for saving created sound settings to memory.
How to reset all memory to factory presets.
Advice on organizing and documenting stored memory settings.
Using MIDI to recall memory settings and control volume.
Controlling reverb, tremolo, chorus, and tape echo via MIDI.
Utilizing the speaker simulator for line out signals.
Setting up program change numbers to recall specific memory settings.
Configuring MIDI receive channels and merge functions.
Backing up internal memory data to an external MIDI device.
Enabling or disabling the speaker simulator feature.
Defining the point of volume control for MIDI pedal input.
Transferring memory and setup data between DG series amplifiers.
Explains errors E1 (Motor Drive) and E2 (MIDI Receive Buffer Full).
Explains errors E3 (Communication), E4 (Bulk Receive Check Sum), E5 (Bulk Receive Data Abnormality).
Explains error E6 related to the backup battery.
Details on digital processing, reverb, effects, and analog power amps.
Specifications for MIDI functions and panel controls.
Details on connection jacks, power, dimensions, and weight.
Specifications and usage for the S412V speaker enclosure.
Specifications and usage for the S112 speaker enclosure.
Instructions for connecting speaker enclosures to the amplifier.
To Next Page
