DM7 Console Owner’s Manual
6
Information
About copyrights
• Copying of the software or reproduction of this manual in
whole or in part by any means is expressly forbidden without
the written consent of the manufacturer.
• Copying of commercially available musical data including but
not limited to MIDI data and/or audio data is strictly prohibited
except for your personal use.
Protection of copyright
• Do not use this product for any purpose that may infringe
upon the rights of any third party including copyrights, as
established by law in each country or region.
• Yamaha bears no responsibility for any infringement upon
third party rights that may occur as a result of using this
product.
About functions/data bundled with the product
• This product uses Dante IP Core and Dante API for ARM.
Refer to the Audinate website (English) for details on the
open-source licenses for the particular software.
https://www.audinate.com/software-licensing
• The open source license used with this product can be
checked on the screen of the unit. For more details, refer to
the DM7 series Reference Manual.
• XLR-type connectors are wired as follows (IEC60268 standard):
pin 1: ground, pin 2: hot (+), and pin 3: cold (−).
About this manual
• The illustrations and screens as shown in this manual are for
instructional purposes only.
• Steinberg Media Technologies GmbH and Yamaha
Corporation make no representations or warranties with
regard to the use of the software and documentation and
cannot be held responsible for the results of the use of this
manual and the software.
• The company names and product names in this manual are
the trademarks or registered trademarks of their respective
companies.
• Steinberg and Nuendo are registered trademarks of Steinberg
Media Technologies GmbH.
• Windows is a registered trademark of Microsoft Corporation in
the United States and other countries.
• Apple, Mac, and iPad are trademarks of Apple Inc. registered
in the United States and other countries.
• IOS is a trademark or registered trademark of Cisco in the U.S.
and other countries and is used under license.
• The typefaces included herein are solely developed by
DynaComware Taiwan Inc.
• Software may be revised and updated without prior notice.
About disposal
• This product contains recyclable components.
When disposing of this product, please contact the
appropriate local authorities.
(1003-M06 plate bottom en 01)
Yamaha cannot be held responsible for damage caused by
improper use or modifications to the product, or data that is
lost or destroyed.
The model number, serial number, power requirements, etc.,
may be found on or near the name plate, which is at the
bottom of the unit (DM7 COMPACT).
You should note this serial number in the space provided
below and retain this manual as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
Serial No.
To Next Page
Loading...
