Why does my Yamaha Portable Generator engine won't start?
There could be several reasons why your Yamaha Portable Generator isn't starting. Ensure it has fuel, the engine switch is set to “RUN”, and the fuel tank cap air vent lever is “ON”. Add engine oil if needed. You might also need to remove carbon or dry the spark plug. If the fuel line or carburetor are clogged, consult a Yamaha dealer.
What to do if Yamaha EF2200iS Portable Generator suddenly stopped?
If your Yamaha Portable Generator suddenly stopped, make sure the connected device(s) are correctly plugged in and that the engine is running correctly. Also, check that the total wattage of the connected devices is within the generator's rated range. If problems persist, consult a Yamaha dealer.
What to do if Yamaha EF2200iS Portable Generator output indicator(s) do not come on?
If the output indicators on your Yamaha Portable Generator don't light up, first ensure that the total wattage of the connected devices is within the rated range. If the issue continues, consult a Yamaha dealer.
What to do if Yamaha EF2200iS Portable Generator device(s) that had been working correctly before do not work?
If devices previously working with your Yamaha Portable Generator now fail, try connecting them directly without extension cords. Avoid using devices sensitive to voltage fluctuations and confirm that the total wattage of all connected devices remains within the generator's specified range.
Why is the oil level warning light flashing on my Yamaha EF2200iS Portable Generator?
If the oil level warning light is flashing on your Yamaha Portable Generator, add sufficient engine oil and ensure the generator is placed on a level surface.
Why Yamaha Portable Generator overload indicator light does not turn off?
If the overload indicator light on your Yamaha Portable Generator stays on, unplug all connected devices from the generator's receptacles.
Why after all the output indicator(s) come on, the overload indicator light comes on, then only output indicators turn off after a few seconds or a few minutes in Yamaha EF2200iS?
If, after the output indicators illuminate, the overload indicator light activates, and then only the output indicators turn off after a short period, it signifies the Yamaha Portable Generator is overloaded. Disconnect all devices, reduce the total wattage to stay within the rated range, and then press the reset button for 3 seconds while the overload indicator light is on.
What does it mean if Multi-function LED meter flash or come on abnormally in Yamaha EF2200iS Portable Generator?
If the multi-function LED meter on your Yamaha Portable Generator flashes or behaves abnormally, it could be in self-diagnostic mode, which is not a malfunction. If the issue persists, consult a Yamaha dealer.
General| Maximum AC Output | 2200W |
|---|---|
| Rated AC Output | 1800W |
| Fuel Tank Capacity | 4.1 gallons (15.5 liters) |
| Run Time at 1/4 Load | 10.5 hours |
| Noise Level | 57 dB(A) at 1/4 load |
| AC Voltage | 120V |
| Rated AC Output (Amps) | 15A |
| DC Output | 12V, 8.3A |
| Displacement | 79cc |
| Rated Output | 1800W |
| Maximum Output | 2200W |
| Starting System | Recoil |
| Weight | 25 kg |
| Engine Type | 4-stroke, OHV, single cylinder |
| AC Output | 120V, 15A |
| Dry Weight | 25 kg |
To Next Page
