Yamaha Electone HC-2 - Page 2

SUPPLEMENTAL MARKING INFORMATION SPECIAL MESSAGE SECTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
00 NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
( SEE BOTTOM OF KEYBOARD ENCLOSURE )
FOR GRAPHIC SYMBOL MARKING.
Yamaha electronic products will have either a label similar to
the graphic shown above or a molded/stamped facsimile of the
graphic on its enclosure. The explanation of these graphics
appears on this page. Please observe all cautions indicated.
The Exclamation point within an equilateral
triangle is intended to alert the users to the
presence of important operating and main-
tenance (servicing) instructions in the litera-
ture accompanying the product.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user of the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
IMPORTANT SAFETY AND INSTALLATION INSTRUCTIONS
INFORMATION RELATING TO POSSIBLE PERSONAL INJURY, ELECTRIC SHOCK, AND FIRE HAZARD
POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING — When using electronic products, basic pre-
cautions should always be followed, including
the following:
1 Read all Safety and Installation Instructions, Supplemental Marking
» and Special Message Section data. and assembly instructions (where
applicable) BEFORE using your Yamaha electronic product. Check unit
weight specifications before you attempt to move this instrument!
2 Main Power Supply Verification: Your Yamaha electronic product has
= been manufactured specifically for the main supply voltage used in
your area. If you should move, or if any doubt exists, please contact your
dealer for instructions. The main supply voltage required by your electronic
product is printed on the name plate. For name plate location see graphic
in Special Message Section
3 This product may be equipped with a polarized line plug (one blade
= wider than the other). If you are unable to insert the plug into the outlet,
contact an electrician to have your obsolete outlet replaced. Do NOT
defeat the safety purpose of the plug. Yamaha products not having
polarized plugs incorporate construction methods and designs that do not
require line plug polarization.
4 WARNING —Do NOT place objects on your electronic product's
= power cord or place the unit in a position where anyone could trip
over, walk over, or roll anything over cords of any kind. Do NOT allow your
electronic product or its bench to rest on or be installed over cords of any
type. Improper installations of this type create the possibility of a fire hazard
and/or personal injury.
Environment: Your electronic product should be installed away from
a heat sources such as a radiator, heat registers and/or other products
that produce heat, Additionally, the unit should not be located in a position
that exposes the cabinet to direct sunlight, or air currents having high
humidity or heat levels.
6 Your Yamaha electronic product should be placed so that its location
= Or position does not interfere with its proper ventilation.
7 Some Yamaha electronic products may have benches that are either
» à part of the product or supplied as an optional accessory. Some of
these benches are designed to be dealer assembled. Please make sure
that the bench is stable before using it. The bench supplied by Yamaha was
designed for seating only. No other uses are recommended.
Some Yamaha electronic products can be made to operate with or
8. without the side panels or other components that constitule a stand.
These products should be used only with the components supplied or a cart
or stand that is recommended by the manufacturer.
9 This product, eigher alone or in combination with an amplifier and
= headphones or speakers, may be capable of producing sound levels
that could cause permanent hearing loss. Do not operate for a long period
of time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult an
audiologist.
10 Do not use your Yamaha electronic product near water or in wet
= environments. For example, near a swimming pool, spa, or in a wet
basement.
Care should be taken so that objects do not fall, and liquids are not
11. spilied, into the enclosure through openings
= Service person when:
The power-supply cord or plug has been damaged: or
b. Objects have fallen, or liquid has been spilled into the product: or
c. The product has been exposed to rain: or
d. The product does not operate, exhibits a marked change in
performance: or
. The product has been dropped, or the enclosure of the product has been
damaged.
12 Your Yamaha electronic product should be serviced by a qualified
a.
Ф
When пої іп use, always turn your Yamaha electronic product
13. “OFF”. The power-supply cord of the product should be unplugged
from the outlet when it is to be left unused for a long period of time. Notes:
In this case, some units may lose some user programmed data. Factory
programmed memories will not be affected
Do not attempt to service the product beyond that described in the
14. user-maintenance instructions. All other servicing should be
referred to qualified service personnel.
Electromagnetic Interference (RFI). This series of Yamaha electronic
15. products utilizes digital (high frequency pulse) technology that may
adversely affect Radio/TV reception or the operation of other devices that
utilize digital technology. Please read FCC Information (Page 5) for
additional information.
PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE!
E C ei ERIS
da", әй ge dé diim