Why can't I start the rhythm at the beginning of a recording on my Yamaha Musical Instrument?
The MDR on your Yamaha Musical Instrument is designed so that the rhythm cannot be started at the very beginning of a recording. If you wish to use the rhythm, start it after the time indicator appears in the display.
How to reduce noise from my Yamaha Musical Instrument?
If you're experiencing noise issues with your Yamaha Musical Instrument, it could be due to interference from other electrical appliances or power tools nearby. Try plugging the instrument into an electrical outlet that's as far away as possible from the device causing the interference. When you use the instrument along with an application on your iPhone/iPad, we recommend that you first set “Airplane Mode” to “ON” then set “Wi-Fi” to “ON” on your iPhone/iPad in order to avoid noise caused by communication.
How to stop my Yamaha Musical Instrument from vibrating surrounding objects?
Resonance from powerful bass sounds produced by the Yamaha Musical Instrument can cause surrounding objects, like cabinets or glass windows, to vibrate. To fix this, try relocating these objects or lowering the instrument's volume.
What to do if my Yamaha Musical Instrument has no sound?
If you're not getting any sound from your Yamaha Musical Instrument, make sure of the following: * The MASTER VOLUME dial isn't set too low; turn it clockwise. * The Expression Pedal is pressed down. * The speaker cord plug is securely connected to the Main Unit.
What to do if the pedal cord isn't connected properly to my Yamaha Musical Instrument?
If the pedal cord isn't connected properly, securely insert the pedal cord plug to the Main Unit of your Yamaha Musical Instrument.
What to do if the USB device disconnected from my Yamaha Musical Instrument?
If communication with the USB device connected to your Yamaha Musical Instrument has been shut down, disconnect the device from the [USB TO DEVICE] terminal and then turn the instrument's power back on.
Why does my Yamaha Musical Instrument say 'USB flash drive is damaged'?
The message will be shown when using the USB flash drive to which frequently recording/deleting operations have been applied. Format the USB flash drive, after checking if the USB flash drive does not contain any important data, then try to use again on your Yamaha Musical Instrument.
What to do if my Yamaha Musical Instrument is not recognizing an unformatted drive?
Recognizing an unformatted drive takes a few seconds after it is inserted. Wait about 30 seconds, then try to format again your Yamaha Musical Instrument.
Why can't I name my song on my Yamaha Musical Instrument?
If you are having trouble with song/folder names, make sure that: * The Song/folder name is not too long (maximum 50 characters). * The Song/folder name is valid. * The path name is not too long. Reduce the layer or shorten the Song/folder name to shorten the path.
Why isn't my Yamaha Musical Instrument recording?
If your Yamaha Musical Instrument isn't recording properly, check the following: * Ensure the desired part is set to REC or PLAY in the PART 1 and PART 2 Pages. * Make sure the performance data doesn't exceed the 1 MB limit. * Verify that the USB flash drive isn't write-protected; if it is, cancel the write-protect.
Basic precautions to avoid serious injury or death from hazards.
Basic precautions to avoid physical injury or damage to instrument/property.
Notices regarding instrument handling to prevent malfunction or damage.
Guidelines for cleaning and caring for the instrument's surface.
Instructions for saving important Registration data to a USB flash drive.
Lists the physical documents accompanying the instrument.
Information on accessing additional PDF manuals online.
Describes the 601 Registrations available for instant setup and customization.
Details the 540 AWM Voices, Super Articulation, and touch response features.
Highlights the selection of rhythms with variations and their matching accompaniment.
Explains the feature for playing drum and percussion sounds from the keyboard.
Covers recording performances and managing data on a USB flash drive.
Details recording performances as stereo WAV audio data to a USB flash drive.
Provides a diagram and labels for the main controls and connection terminals.
Describes the layout and functions of the controls on the front panel.
Instructions for connecting the power cord and AC outlet safely.
Step-by-step guide on how to power the instrument on and off.
Explains how to use the MASTER VOLUME and Expression Pedal for volume control.
Explains how to use the Registration Menu to instantly change panel settings.
Details on navigating and interacting with the Electone's LCD display.
Instructions on how to change the display language between English and Japanese.
Procedure for resetting all settings to factory defaults, including warnings.
Explains the availability of Voices for Upper, Lower, and Pedalboards.
How to check and set the On/Off status of Voices for each section.
Step-by-step guide on selecting specific Voices using panel buttons.
Details on adjusting Voice volume using panel buttons and display settings.
Instructions on how to select Voices for the second section of each keyboard.
Guide on accessing and assigning custom Voices using User buttons.
How to access and adjust various voice parameters via the Voice Condition display.
Detailed explanation on setting and controlling the Rotary Speaker effect.
Instructions on adjusting the Reverb effect using panel buttons and display.
Guide on using the Sustain effect for expressive control over note decay.
How to select and play rhythms using the front panel rhythm buttons.
Explains the different sections of a rhythm (Intro, Main, Fill In, Break, Ending).
Detailed instructions on starting, stopping, and controlling rhythm sections.
Guide on changing the rhythm tempo using the TEMPO buttons and indicator.
How to adjust rhythm percussion volume and reverb levels.
Instructions on selecting custom rhythms using User buttons.
How to turn on and configure accompaniment parts for rhythms.
Explanation of the A.B.C. function for automatic bass accompaniment and its modes.
Details on the M.O.C. feature for adding harmony to melodies.
Introduction to the Keyboard Percussion function and its modes (Preset, User).
Step-by-step guide to assigning custom drum sounds to keys.
How to create and save panel settings to Registration Memory buttons.
Instructions on how to recall stored Registrations by pressing numbered buttons.
Procedure for saving Registration data from the instrument to a USB flash drive.
How to reset all Registration Memory data to factory presets.
Explains how to use the footswitch to change Registrations sequentially or jump.
How to access the Music Data Recorder functions for recording and playback.
Overview of the MDR display's page structure and navigation.
Instructions on how to record performances as Songs to a USB flash drive.
How to re-record a song or specific parts if a mistake is made.
How to re-record specific phrases or sections within a song.
Instructions on renaming Songs and folders on the USB flash drive.
How to save Registration Memory data to a Unit within a Song on the USB drive.
Explains how to save multiple Registration Units to a single Song.
Procedure for replacing existing Registration data in a Unit without altering performance data.
How to delete Registration Units saved to a Song.
Explains how to manage multiple Registration Units for songs with many registrations.
How to load specific Registration Units from a Song back to the Electone.
Instructions on playing back recorded Songs and loading associated Registration data.
How to adjust the tempo of a Song during playback.
How to set repeat playback modes for Songs or folders.
Guide on playing back XG Song data and adjusting its part settings.
Managing files and folders, including copy, delete, and creation operations.
How to delete Songs and folders from the USB flash drive.
Step-by-step instructions for creating new folders on the USB flash drive.
How to convert Electone Song data to XG format for playback on XG devices.
How to check the available memory on the USB flash drive or Song data size.
Important safety and handling precautions for connecting USB devices.
How to connect and use USB flash drives for saving and reading data.
Step-by-step guide to format a USB flash drive for instrument compatibility.
How to record performances as audio files (.WAV) to a USB flash drive.
Instructions on how to play back audio files (.WAV) from a USB flash drive.
How to adjust playback settings like volume, tempo, and pitch for audio files.
Guide on deleting audio files or renaming them on the USB flash drive.
Explains the use of the Right Footswitch for the Registration Shift function.
How to set and use the Left Footswitch for various functions like Rhythm, Glide, Rotary Speaker.
How to control Rotary Speaker effect (on/off) using the Left Footswitch.
How to change the instrument's key by semitones using the Utility display.
How to finely adjust the instrument's tuning using the Utility display.
Explains the purpose of various jacks like AUX IN, AUX OUT, and PHONES.
Details on connecting USB flash drives and wireless LAN adaptors.
Guide on connecting the Electone to a computer for MIDI communication.
Instructions for connecting an iPhone/iPad wirelessly via a USB wireless LAN adaptor.
Details on setting up wireless LAN connections, including network display.
Step-by-step guide for assembling the Electone unit and its accessories.
Common problems and their possible causes and solutions for the instrument.
Technical specifications of the Electone, including product details and features.
General| Type | Electronic Organ |
|---|---|
| Touch Response | Yes |
| Knee Lever | Yes |
| Sound Generator | AWM (Advanced Wave Memory) |
| Polyphony | 128 notes |
| Effects | Reverb, Chorus, DSP |
| Display | LCD |
| Speakers | 12 cm x 2 |
| Connectivity | MIDI in/out |
| Power Supply | AC adapter |
To Next Page